Test Run
Installing Thermostat
• DIP switch setting :
Set DIP switch No. 8 to ʻONʼ. Otherwise, the unit can not recognize the thermostat.
• Remote Controller :
- ʻThermostatʼ icon is displayed on the remote controller.
- Button input is prohibited.
Thermostat Icon
NOTICE
Thermostat Operation with Remote Controller
Following features are permitted when thermostat is installed :
•
SET TEMP button
•
VIEW TEMP button
•
Temperature adjusting button (*)
•
DHW heating button
(*) : The unit is not turned on/off according to the setting temperature at the remote controller.
It is turned on/off according to the thermostat signal
Following features are NOT permitted when thermostat is installed :
•
Operating mode (cooling/ heating/ weather-dependent) selection
•
Time scheduling
•
Operation On / Off
52 Hydro Kit