Cgeneral Information; Introduction; Additional Indications; Intended Use And Restrictions - Electrolux 6 GN 1/1 User Manual

C GENERAL INFORMATION
WARNING
Refer to "WARNING and Safety
Information"
C.1

Introduction

Given below is some information regarding the intended use of
this appliance, its testing, and a description of the symbols used
(that identifies the type of warning), the definitions of terms used
in the manual and useful information for the appliance user.
C.2

Additional indications

The drawings and diagrams given in the manual are not in scale.
They supplement the written information with an outline, but are
not intended to be a detailed representation of the machine
supplied.
The numerical values given on the machine installation diagrams
refer to measurements in millimeters and/or inches.
C.3

Intended use and restrictions

This appliance is designed for cooking food. It is intended for
collective use.
Any other use is deemed improper.
CAUTION
The machine is not suitable for installation
outdoors and/or in places exposed to
atmospheric agents (rain, direct sunlight,
etc.).
NOTE!
The manufacturer declines any liability for improper
use of the product.
C.4

Testing and inspection

Our appliances have been designed and optimized, with
laboratory testing, in order to obtain high performance and
efficiency.
CAUTION
For Energy Star-listed 20 grids ovens
models performances are obtained with the
standard-supplied trolley, which is available
also as additional accessory.
Passing of the tests (visual inspection - electrical test - functional
test) is guaranteed and certified by the specific enclosures.
C.5

Copyright

This manual is intended solely for consultation by the operator
and can only be given to third parties with the permission of
Electrolux Professional SpA.
C.6

Keeping the manual

The manual must be carefully kept for the entire life of the
machine, until scrapping. The manual must stay with the
machine in case of transfer, sale, hire, granting of use or leasing.
C.7

Recipients of the manual

This manual is intended for:
• the carrier and handling personnel;
• installation and commissioning personnel;
• the employer of machine users and the workplace manager;
• operators for normal machine use;
• specialised personnel - Customer Care service (see service
manual).
C.8

Definitions

Listed below are the definitions of the main terms used in the
manual. It is advisable to read them carefully before use.
Operator machine
maintenance, cleaning, repair and trans-
port personnel.
Manufacturer Electrolux Professional SpA or any other
service centre authorised by Electrolux
Professional SpA.
Operator for an operator who has been informed and
normal trained regarding the tasks and hazards
machine use involved in normal machine use.
Customer Care an operator instructed/trained by the Man-
service or spe- ufacturer
cialised professional and specific training, experi-
personnel ence and knowledge of the accident-
prevention regulations, is able to appraise
the operations to be carried out on the
machine and recognise and prevent any
risks. His professionalism covers the
mechanical, electrotechnical and elec-
tronics fields etc.
Danger source of possible injury or harm to health.
Hazardous any situation where an operator is exposed
situation to one or more hazards.
Risk a combination of probabilities and risks of
injury or harm to health in a hazardous
situation.
Protection safety measures consisting of the use of
devices specific technical means (guards and
safety devices) for protecting operators
against risks.
Guard an element of a machine used in a specific
way to provide protection by means of a
physical barrier.
Safety device a device (other than a guard) that elimi-
nates or reduces the risk; it can be used
alone or in combination with a guard.
Customer the person who purchased the machine
and/or who manages and uses it (e. g.
company, entrepreneur, firm).
Electrocution an accidental discharge of electric current
on a human body.
C.9

Responsibility

The Manufacturer declines any liability for damage and
malfunctioning caused by:
• non-compliance with the instructions contained in this
manual;
• repairs not carried out in a workmanlike fashion, and replace-
ments with parts different from those specified in the spare
parts catalogue (the fitting and use of non-original spare parts
and accessories can negatively affect machine operation and
invalidates the original manufacturer warranty);
• operations carried out by non-specialised personnel;
• unauthorized modifications or operations;
• missing, lack or inadequate maintenance;
• improper machine use;
• unforeseeable extraordinary events;
installation, adjustment,
and who, based on
use,
his
11