Advertisement
Troubleshooting and specifications
TROUBLESHOOTING
SYMPTOM
POSSIBLE CAUSE
The Coffee Mill does not
Appliance is not
operate.
plugged in.
The cup quantity control
is set to "off".
The safety cut-out has
operated.
Fuse needs replacing.
Grind quality is poor.
Grinding mechanism is
dirty.
SPECIFICATIONS
SOLUTION
AC supply:
Power input:
Check that the Coffee
Unit dimension:
Mill is plugged in
properly.
We continually strive to improve our products,
specifications may change without prior notice.
Turn this control to
1-12 cups.
Leave to cool for 10
Note: This product is exclusively available through Dixons
minutes. Make sure
Stores Group. In the unlikely event of a problem with your
operating cycles do
product please return to the store where your purchase was
not exceed 1 minute.
made.
Make sure the grand
coffee container has
not been overfilled.
Empty and leave to
Partmaster Direct can provide accessories, spares, batteries
cool for 10 minutes.
and replacement parts with Next Day Delivery available upon
request.
Replace the 3A fuse.
Please call: 0870 600 1338 (UK customers only)
Clean the grinding
Calls charged at National Rate...or visit our website at
mechanism.
www.partmaster.co.uk
230V ~ 50Hz
85W
170 (L) x 100 (W) x 250 (H)
Advertisement
