Huawei eSpace 6805 Administrator's Manual page 36

eSpace 6805 IP Phone
Administrator Guide
Table 3-20 Advanced Settings
Parameter
802.1X Mode
802.1X Identity
MD5 Password
HTTP Proxy
HTTPS Proxy
Layer 3 QoS
Layer 2 QoS 802.1Q/VLAN Tag
Layer 2 QoS 802.1Q/VLAN Tag
PC port mode
Enable LLDP
Issue 01 (2014-01-06) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuration and Loading Files
Description
Enables/disables 802.1X mode. To enable
802.1X mode, this field should be set to
EAP-MD5.
802.1x authentication supports only the MD5 mode.
Enter the Identity for the 802.1X mode.
Enter the MD5 Password for 802.1X mode.
Specifies the HTTP proxy URL for the
phone to send packets to. The proxy server
will act as an intermediary to route the
packets to the destination.
Specifies the HTTPS proxy URL for the
phone to send packets to. The proxy server
will act as an intermediary to route the
packets to the destination.
Defines the Layer 3 QoS parameter. This
value is used for IP Precedence, Diff-Serv
or MPLS.
Assigns the VLAN Tag of the Layer 2 QoS
packets.
Assigns the priority value of the Layer 2
QoS packets. Valid range is 0 to 7.
Configures the PC port mode. When set to
"Mirrored", the traffic in the LAN port will
go through PC port as well and packets can
be captured by connecting a PC to the PC
port.
Controls the LLDP (Link Layer Discovery
Protocol) service.
34