SUN2000-(2KTL-6KTL)-L1
User Manual
No.
3
4
5
Note a: The minimum cross-sectional area of the cable should be selected based
on the rated value of the AC fuse.
Issue 03 (2020-07-20)
Cable
Type
(Option
Outdoor shielded twisted
al)
pair cable
Signal
cable
AC
● Not using the PE
output
power
a
cable
● Using the PE
PE cable
Single-core outdoor
copper cable and M6 OT
terminal
NO TE
● The minimum cable diameter must comply with local cable standards.
● The factors that affect cable selection include the rated current, cable type, routing
mode, ambient temperature, and maximum expected line loss.
Copyright © Huawei Technologies Co., Ltd.
equipotential point at
the AC output port:
two-core (L and N)
outdoor copper cable
equipotential point at
the AC output port:
three-core (L, N, and
PE) outdoor copper
cable
5 Electrical Connection
Recommended
Specifications
● Conductor cross-
sectional area:
– Combined
crimping of
cables on the
port: 0.20–0.35
2
mm
– Crimping the
cables on the
port without
combining them:
2
0.20–1 mm
● Cable outer
diameter:
– 4-hole rubber
plug: 4–8 mm
– 2-hole rubber
plug: 8–11 mm
● Conductor cross-
sectional area: 4–6
2
mm
● Cable outer
diameter: 10–21
mm
2
4–10 mm
Source
Prepar
ed by
the
custom
er
Prepar
ed by
the
custom
er
Prepar
ed by
the
custom
er
34