8
FUNCTION TEST
Electrical Functions
The electrical functions of the DC6000 are divided in a 400/480 V 3-Phase system and a 1-phase 230 V system.
The 400/480 V 3-Phase system is used to power the Blower Motor and to power the Auxiliary power outlet used
to power the connected grinder. The Blower Motor is equipped with an Hour Meter that measures its running time.
The 230 V system is generated by a transformer that's connected to the 3-phase and is used to power the air com
pressor and a PLC.
The air compressor is used to generate pressure to the pressure container which is used to clean the filter with the
purge function�
The PLC controls on/off function for the blower motor, the manual / automatic purge function�
These functions are connected together according to the flowchart
XX
14