Brake Maintenance; Testing The Parking Brake - Toro 320-D Operator's Manual

2. Remove the key from the key switch and allow
the engine to cool.
3. Remove the radiator cap and check the coolant
level (Figure 38).
The coolant should be up to the filler neck.
Figure 38
1. Radiator cap
4. If the coolant level is low, add coolant up to the
bottom of the filler neck.
Important:
Do not overfill the radiator.
5. Replace the radiator cap, ensuring that it is
tightly sealed.

Brake Maintenance

Testing the Parking Brake

Service Interval: Before each use or daily
1. Engage the parking-brake; refer to
Parking-Brake Lever (page
2. Start the engine.
3. Slowly attempt to drive the machine forward or
rearward.
4. If the machine moves, contact your Authorized
g005937
Toro Dealer for service.
37
17).