Jumper Configurations; Hard Reset - Philips CU1216 Series Manual

4.1.3. Jumper Configurations

+2.5Volts option
1001 :
+1.8Volts option
1002 :
+5.0Volts Antenna Power Up option
1031 :
: PLL synthesizer Address Selection option:
1034
AS1 = C6 (pin 1 & 3)
AS1 = C0 (pin 2 & 4)
PLL synthesizer Address Selection option /AS0. (not application for CU/TU1216)
1035 :
+1.2Volts supply option (not application for CU/TU1216)
1039 :
+4.0Volts External AGC supply option
1036 :

4.1.4. Hard Reset

Connect Jumper 1038 to do a hard reset on the DUT.
11
- -
BU RF Solutions