Create a backup of the settings and licenses
Introduction
This topic describes how to create a backup of the settings and licenses on the PRISMAsync
controller.
Before you begin
NOTE
Do not use the same USB stick for creation of the backup and the installation of the system
software.
• A USB stick
Procedure
1.
Insert the USB stick into the USB port on left side of the operator panel.
2.
In the [System] section of the [Maintenance] tab on the Operator panel, touch [Go to service
mode].
3.
Select the [Backup] button. The system will detect the USB stick and will ask to confirm the
location and filename. After confirmation, the settings are copied to the USB stick.
The system will detect the USB stick and will ask to confirm the location and filename. After
confirmation, the settings are copied onto the USB stick.
4.
Remove the USB stick from the operator panel after the settings are copied.
Create a backup of the settings and licenses
Chapter 9 - System software
105