Advertisement
2
Installing the Backup Alarm
Parts needed for this procedure:
1
Backup alarm
2
Hex-head screw (1/4 x 3/4 inch)
2
Flange nut (1/4 inch)
1
Wire harness
2
Tie clip
1
Clamp
2
Cable tie
Installing the Backup Alarm
Groundsmaster 4000 and 4100 Series
Machines
1.
Secure the backup alarm to the rear frame with
2 hex-head screws (1/4 x 3/4 inch) and 2 flange
nuts (1/4 inch) as shown in
1. Hex-head screws (1/4 x
3/4 inch)
2. Flange nuts (1/4 inch)
2.
Install the tie clips to the wire harness and
secure the tie clips and wire harness to the rear
frame
(Figure
2).
Figure
1.
Figure 1
3. Backup alarm
4. Rear frame
1. Wire harness
2. Tie clips
3.
Insert the wire harness into the clamp
1. Wire harness
4.
Remove the bolt and washer located underneath
the rear frame
g032352
1. Rear frame
2. Washer
2
Figure 2
3. Rear frame
Figure 3
2. Clamp
(Figure
4).
Figure 4
3. Bolt
g032353
(Figure
3).
g032354
g032355
Advertisement
