Blocked Shaving Heads; Charging With The Supply Unit - Philips 9000 Series Manual

Charging

Charging with the supply unit

2
1

Blocked shaving heads

If the shaving heads are blocked, the notification
symbol lights up orange continuously. The
replacement reminder and the cleaning reminder flash
white alternately and the shaver beeps. In this case,
the motor cannot run because the shaving heads are
soiled or damaged.
If the shaving heads are soiled, you have to clean
them. If the shaving heads are damaged, you have to
replace them.
Charge the shaver before you use it for the first time
and when the display indicates that the battery is
almost empty.
When you connect the shaver to the wall socket, you
hear a sound.
Charging takes approx. 1 hour. A fully charged shaver
has a shaving time of up to 60 minutes.
Note: You cannot use the appliance while it is
charging.
1
Make sure the appliance is switched off.
2 Put the small plug in the appliance and put the
supply unit in the wall socket.
When you connect the shaver to the wall socket,
you hear a sound.
3 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
appliance.
27
English