Panasonic NF-N50A Operating Instructions Manual page 6

How To Use
Note:
• Wash the Removable Ceramic Pot and Glass Lid before using the appliance for the fi rst time
and dry well.
• Be careful when removing the Removable Ceramic Pot out from the Body. Ensure the
Removable Ceramic Pot is completely taken out before moving away.
• Authentic Stoneware is baked under extreme heat. Therefore each Removable Ceramic Pot
is individual and differs slightly from every other Pot. This unique characteristic may result in a
minor rocking of the Glass Lid which should not be of concern.
• Low heat cooking does not allow steam to escape, hence there will be no signifi cant loss of
juice, fl avour or nutrition.
• After using the Removable Ceramic Pot for sometime, "hairline mark" may appear on the inner
and outer surfaces of the pot. This type of mark is only at the surface and it is normal.
• For a long life-span of the appliance, please follow the maximum cooking time. Recommended
maximum cooking time for "Low" and "Auto" mode is 12 hours and for "High" mode is 8 hours.
Please wait for the appliance to completely cool down before starting the next cooking.
• Cooking time may vary depending on one's own recipe and ingredients.
1
Place the Removable Ceramic Pot into
the Body. After putting the ingredients
into the Removable Ceramic Pot, place
the Glass Lid.
2
Plug into the power supply after
ascertaining the Switch position is at
"Off" position.
NF-N50A / NF-N30A
EN6
Slow_Cooker.indb 6 Slow_Cooker.indb 6
Low High
Off Auto
Low High
Off Auto
NF-N15
Off On
3
Set the switch settings.
NF-N50A / NF-N30A
Power
Low High
Off Auto
indicator will
light up.
NF-N15
Lamp inside
Off On
the Switch
will light up.
4
Adjust the cooking time and the
setting accordingly for optimum
cooking result.
• Do not open the Glass Lid too often during
cooking to avoid heat loss.
• "Low" function is for stewing or keep-warm of
cooked ingredients. Therefore, it will not boil
the ingredients.
• "High" function is for cooking or boiling at a
short time. Food should be monitored when
using "High" setting.
• "Auto" function is ideal for gradually cooking
throughout the day or night.
5
After using, set the Switch to "Off"
position. Then, switch off the power
supply source and unplug.
Set the Switch
to "Low",
"High" or
"Auto".
Set the Switch
to "On".
3/16/2020 9:57:50 AM 3/16/2020 9:57:50 AM