3 Get started
Always follow the instructions in this chapter in
sequence.
Install batteries
The batteries can only back up clock and alarm
settings.
Caution
•
Risk of explosion! Keep the batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Batteries contain chemical substances, so they should
be disposed of properly.
Insert 2 AAA batteries (not provided) with
correct polarity (+/-) as illustrated.
Connect power
Caution
•
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the clock radio..
•
Risk of electrical shock! When you unplug the power
adapter, always pull the plug from the socket. Never
pull the cord.
•
Use only the AC power adapter specified in the
manufacturer or sold with this unit.
Note
•
The type plate is located at the bottom of the clock radio.
EN
4
Set time
Note
•
You can only set time in standby mode.
1
In standby mode, press and hold SET TIME
for more than 2 seconds.
2
TUN
to select <24 HR> or
Press
<12 HR> hour format, then press SET TIME
to confirm.
3
Press HR to set hour and MIN to set minute,
then press SET TIME to confirm.
4
TUN
Press
to set date, month and
year [DD-MM-YY], then press SET TIME to
confirm.
5
TUN
to select <UPDATE FROM
Press
RADIO> or <NO UPDATE>, then press
SET TIME to confirm.
» [SAVED] is displayed and the time is set.
Turn on
Press
to turn on the clock radio.
» The unit switches to the last selected
source.
To switch to standby mode, press
» The real-time clock is displayed.
again.