How To Attach Each Part; Faq - Panasonic EH-SA97 Operating Instructions Manual

How to attach each part

How to attach the lid
1
1
Align the positions of the main
unit and lid.
2
2
Push the lid from the top.
Push the lid until a "click" sound is
heard.
Check that the lid is secured.
How to attach the water supply cap seal
1
1
Push up the center of
the water supply cap.
Use your index finger to push
up on the center of the water
supply cap.
2
2
Press lightly along the
outer rim of the water
supply cap seal and find
the raised edge on the
water supply seal.
18
EH-SA97_HK.indb 18

FAQ

►About odors
There is a strange odor.
Q
Why?
If you are using the steamer for the first time or if you
have not used it for a long time (several weeks or
more), the steamer may give off an odor.
Clean the inside of the main unit a few times and use it
a couple of times for the odor to go away. (See
A
page 16.)
In addition, when you are not going to use the steamer
for a long period of time (several weeks or more), throw
away the water in the water supply tank and main unit
first before storing it.
►About the steam and mist
Q Can I use the steamer with cool mist only?
The steamer cannot be used with cool mist only. There
A
is also no course that starts from a cool mist.
Q The CHECK lamp blinks and the course stops midway.
This is because the water was insufficient, or the water
Water supply
cap seal
supply tank was removed during use.
A
Cool down the main unit for about 10 minutes first before
supplying water and attaching the water supply tank.
2016/04/06 13:33:38