Safety Information - Nokia 7368 ISAM ONT E-240G-B Product Manual

Install an E-240G-B ONU
•
•
•
•
•
•
•

6.5 Safety information

Read the following safety information before installing the ONU.
58
Release 06.01.01 | June 2019 | Edition 09
wire strippers
fiber optic splicing tools
RJ-45 cable plug crimp tool
voltmeter or multimeter
optical power meter
drill and drill bits
pin-in-hex screwdriver
Hazardous electrical voltages and currents can
Danger 1 —
cause serious physical harm or death. Always use insulated
tools and follow proper safety precautions when connecting or
disconnecting power circuits.
Make sure all sources of power are turned off and
Danger 2 —
have no live voltages present on feed lines or terminals. Use a
voltmeter to measure for voltage before proceeding.
Always contact the local utility company before
Danger 3 —
connecting the enclosure to the utilities.
This equipment is ESD sensitive. Proper ESD
Warning —
protections should be used when removing the fiber access
cover of the ONU.
Keep indoor ONUs out of direct sunlight. Prolonged
Caution —
exposure to direct sunlight can damage the ONU.
3FE-46261-AAAA-TCZZA
7368 ISAM ONT E-240G-B Product Guide
Issue: 01