Sharp AQUOS Operation Manual page 34

sharp operation manual
>> On-Screen Display Menu
<<
Example
file:///E:/hejiaye/html/B123389-00_EN-FR-ES/Base%20data/HTML/eng/4-11.html?next
Initial Setup (Continue)
Input Settings
HDMI auto view
When you view images sent from external equipment in an
HDMI connection, this function allows the image size on the
TV to automatically switch to an appropriate one.
NOTE
• Refer to your external equipment operation manual for the
signal type.
HDMI type selection
Sets the HDMI type for HDMI INPUT 1 and 2 terminals. Set to
"Full" when a HDMI 4K60P 4:4:4 device is connected, and
data to "Limited" when an HDMI 4:2:0 device is connected.
Digital Audio Output
You can output digital audio to an AV amplifier or similar
device whose DIGITAL AUDIO INPUT terminal is connected
to the DIGITAL AUDIO OUT terminal on the TV. Please select
an audio output format compatible with the audio format of the
program you are watching and the equipment connected.
PCM: For connecting to equipment that does not support
Dolby Digital. The same audio (main, sub, or main/sub) as
the audio of the program being viewed is output.
2-channel audio with a sampling rate of 48 kHz or less is
output as linear PCM audio.
Bitstream: For connecting to an audio system that supports
Dolby Digital. Audio is output through both the main and
sub channels.
NOTE
• Video input audio are output in PCM mode even when
"Bitstream" is selected.
• PCM digital input signals are output in PCM mode even
when "Bitstream" is selected.
ENG 4-11
Audio Output Select
You can select which device is used for outputting audio.
Headphone: Output audio through headphones.
Audio out: Output audio through an external AMP.
NOTE
• If you select "Headphone" when a cable is inserted in the
AUDIO OUT terminal, the TV speakers are muted and all
Audio menu items cannot be adjusted except for Balance.
• If you select "Audio out", sound via the AUDIO OUT
terminal is not adjustable and constantly outputs.
CAUTION
• AUDIO OUT terminal is also used for headphones.
Reduce the volume before using headphones.
Overwhelming sound may damage your hearing.
Input Skip
This setting allows you to skip the TV, HDMI1, HDMI2 or
Input3 on the Input Selection operation.
Page 1 of 1
2020/3/25