Advertisement
Click Set.
Click on "Advanced Mode".
Click on "Network."
Click on "Multicast"
Set the following parameters for the "Multicast" setting Stream 1 and Stream 2.
Enable:
Multicast Address:
Port:
Streaming:
Multicast packet TTL:
(NOTE: The same multicast IP is used for both stream 1 and stream2)
SOP for CCTVs in SunGuide
< check box >
< If provided 232.219.X.X >
(Stream 1) < 5554 >, (Stream 2) < 5556 >
< check box >
< 64 >
Advertisement
