Huawei VS-EC-H24R User Manual page 45

VS-EC-H24R&H28R&H29R
User Guide
Figure 4-6 PTZ- Add Key Point
Step 4
Configure key point parameters, such as the key point No., duration of staying for one
key point and speed of patrol, as shown in Figure 4-7.
The key point is corresponding to the preset. The Key Point No. determines the order at
which the PTZ will follow while cycling through the patrol. The Duration refers to the
time span to stay at the corresponding key point. The Speed defines the speed at which
the PTZ will move from one key point to the next.
Figure 4-7 Key point Configuration
Step 5
Click "OK" to save the key point to the patrol.
Step 6
Repeat the above steps to add more key points.
Issue 04 (2013-06-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 PTZ Controls
37