Precautions; Features - Sony SRP-X100 Operating Instructions Manual

Precautions

On safety
•Check that the voltage selector on the rear panel is set to
the local power line voltage. If not, set the selector to the
correct position using a screwdriver before connecting the
AC power cord to a wall outlet.
VOLTAGE
SELECTOR
120V
•This set includes 2 types of AC power cords.
Please select the one that is suitable for the region that
your are living in.
•Should any liquid or solid object fall into the cabinet,
unplug the unit and have it checked by qualified personnel
before operating it any further.
•Unplug the unit from the wall outlet if it is not to be used
for an extended period of time. To disconnect the cord,
pull it out by grasping the plug. Never pull the cord itself.
On installation
Do not install the unit in a location near heat sources such as
radiators or air ducts, or in a place subject to direct sunlight,
excessive dust, mechanical vibration or shock.
On operation
•Before making program source connections, be sure to
turn the power switch off and unplug the unit.
•When the unit is not used, turn the power off to conserve
energy and to extend the useful life of your unit.
On cleaning the cabinet
Clean the cabinet, panel and controls with a soft cloth
lightly moistened with mild detergent solution. Do not use
any type of abrasive pad, scouring powder or solvent such
as alcohol or benzine.
On repacking
Do not throw away the carton and the packing material. It
makes an ideal container for transport the unit in.
When shipping the unit for repair work or to another
location, repack it as it was.
If you have any questions or problems concerning your
unit, please contact your nearest Sony dealer.
4
230V

Features

The SRP-X100 is a 1U audio mixer having a 6 channel
monaural input, and 3 channel stereo input.
This mixer is ideal as a public address (PA) mixer in small-
scale halls such as civic and banquet halls, and in schools,
AV systems in offices, etc.
6 channel Monaural Inputs
A 6 channel monaural input (XLR jack) for microphone
level inputs is provided.
Supplies power (+48V DC) to condensor microphones with
just one setting.
Input level selector buttons (for 3 - 6 channels) on rear
panel can also be used for stereo input (+4dBu) at line
level.
3 channel Stereo Inputs
Phono jack stereo inputs (-10dBu) for 3 channels are
provided.
A dedicated input connector(ST3) for recorders is provided
to prevent self-oscillation due to feedback from its own
signal.
The REC bus is isolated to prevent self-oscillation due to
feedback from the original signal.
Plentiful Output connectors
Compatible with many systems thanks to Plentiful outputs
including MASTER OUTPUT, SUB OUTPUT and REC
OUTPUT.
All Channels are equipment with Signal Indicators and
the MASTER OUTPUT is equipment a Peak Indicator.
Easy Mounting into 19'EIA Standard Rack.