Place Electrodes On Skin - LG TEC Multi Instruction Manual

5.4 Electrode
5.4.1 Electrode options
The electrodes are disposable and should be routinely replaced
when they start to lose their adhesive nature. If you are unsure
of your electrode adhesive properties, order new replacement
electrodes. Replacement electrodes should be re-ordered through
or on the advice of your physician to ensure proper quality.
Follow application procedures outlined in electrode packing, to
maintain optimal stimulation and to prevent skin irritation.

5.4.2 Place electrodes on skin

Apply electrodes to the exact site indicated by your Physician.
Before applying electrodes, be sure the skin surface over
which electrodes are placed is thoroughly cleaned and dried.
Make sure the electrodes are placed firmly to the skin and
make good contact between the skin and the electrodes.
Place the electrodes over the skin; attach them properly,
firmly, and evenly.
Caution:
Before applying the self-adhesive electrodes, it is
recommended to wash and degrease the skin, and then dry
it.
Do not switch the device on when the self-adhesive
electrodes is not positioned on the body.
Never remove the self - adhesive electrodes from the skin
while the device is still switched on.
It is recommended that, at minimum,1.5" x 1.5" self -
adhering based, square electrodes are used at the
treatment area
5.4.3 Electrode placement
The placement of electrodes can be one of the most important
parameters in achieving success with therapy. Of utmost
15