Epson SOLAR Series Specification And Drawing page 13

Cal.
VS75B
13.How to set the dial
The dial is held by the four guide poles on the solar cell unit.
14.System reset as complete watch
System-reset(Refer to Operation-01[*1].) is required in case of below,
― after replacement of secondary battery unit.
― malfunction or abnormal operation when an error occurs
※It is necessary to set the "0" position after system-reset, because "0" position of small hands may
slip off.
Attention-03
24/Sep./'19
Date :
Rev. : 01
P. 9-03