Recording; Playback - Toshiba D-VR17KB Owner's Manual

Dvd video recorder/video cassette recorder
Table of Contents

Advertisement

E9GA0BD_EN.book Page 50 Monday, March 26, 2007 10:14 AM
3
Select the desired zoom position
using [U / D / L / P], then press
[ENTER].
Zoom playback will start.
Hint
• To exit the zoom menu, press [ZOOM] at step 1.
• To cancel the zoom function, select "x1.0" using
[U / D], then press [ENTER].
Note
• If selecting a smaller factor than that currently
selected, the zoom area is not displayed.
• You cannot slide the zoomed picture on some JPEG
files.
Marker Setup
Video
DVD-V
DVD-V
DVD-RW
DVD-RW
D D VD+R
DVD+RW
VD+RW W
DVD+R
D D VD+R
VD+R
You can assign a specific point on a disc to return
later.
1
During playback, press [DISPLAY].
2
Select the
then press [ENTER] within 1 second,
or wait for 1 second to display the
marker list.
Marker setup menu for DVD-Video
1/ 5
1/ 5
---
1
---
2
---
3
---
4
---
5
---
6
3
Select the desired marker number
using [U / D]. When the disc
reaches the desired point, press
[ENTER].
The title (track) number and the time are
displayed.
4
To return to the marker, select the
desired marker number using
[U / D], then press [ENTER].
Hint
• To clear a marker, select the marker number you
wish to clear, then press [CLEAR].
• You can mark up to 6 points.
50
EN
VR
DVD-RW
DVD-RW
DVD-R
DVD-R
CD
CD
CD
VCD
VCD
VCD
(PBC OFF)
icon using [L / P],
0:01:00 / 1:23:45
DVD
Video
Note
• All markers are erased when you perform the
following operations.
- Open the disc tray.
- Turn off the power.
- Record on a recordable disc.
- Change the mode between Original and Playlist.
(VR mode)
Chasing Playback during Recording
VR
DVD-RW
DVD-RW
You can play back the already recorded part of the
currently recording programme without waiting for the
recording to the end. This function works from 1
minute after the start of the recording.
Make sure to use a DVD-RW disc in VR mode, and
the recording mode is set to LP, EP or SLP.
1
Press [PLAY
] during recording.
B
Playback will start from the beginning of the
programme that you are currently recording.
Screen for the current playback:
1/ 5
1/ 5
0:01:00 / 1:23:45
If you play the fast forward playback and the
playback reaches the scene recorded 1 minute
before, the forwarding playback will automatically
return to the normal playback.
2
To stop the playback, press [STOP
once.
The resume message will appear.
Screen for the current recording:
1/ 5
1/ 5
0:01:00 / 1:23:45
Resume ON
To stop recording, press [STOP
To cancel the resume, press [STOP
-RW
VR
ORG
]
C
-RW
VR
ORG
P10
LP
1:01
] again.
C
] again.
C

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents