Table of Contents
Advertisement
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Remote Modem Connection to Modem Pool
Standard PC / Modem
Cable
Remote
Modem
DK Backup/Admin
Personal Computer
Notes 1. External or Built-in to PC.
2. Program 03 Code 41 for RSSU, PIOU, PIOU(S) slot.
Program 03, Code 49 for RSIU Slot 11.
Program 76-1, 76-2 for RSIU, RSIS, TSIU, or WISU TTY Port setup.
3. Program 03 Code 62 or 64 for PDKU slot.
4. PDIU-DS Jumper plugs (P1-P9) must be set to the B-C position when connected to the TTY port.
Figure 20
DKAdmin/DKBackup PC Remote Modem Connected to Strata DK Modem Pool – Then Auto
Dial Modem Pool DIU to Strata DK DIU/TTY Port.
Communication Setup
DIU initialization string: use default values. Use default values for direct modem init. If
using a fax/modem, you may have to include &Q6 or &K0 into the modem initialization
string to turn off data compression.
Direct modem init should be: default
Customer Dialer Setup
DIU string: (nothing)
Modem string: ATDTXXXXXX.
(XXXXXX is the external modem CO line number)
After connect string: AT~~~ATDDYYY~~~
(YYY is the intercom number of the PDIU-DS connected to the TTY Port. (~~~ must be
used to send carriage return signals.) The DKAdmin/DKBackup dialer sends this string to
connect the PDIU-DS (XXX) to PDIU-D (YYY) when it detects (connect 1200) that the
remote modem has connected to the external modem.
3-pair Modular Cord
(Telephone type, cross-pinned)
CO LINE
CO Line
1
Public
Telephone
Network
Turn off data compression.
Remote Modem Connection to Modem Pool
PDIU-DS (YYY)
PPTC25MDM
(yellow)
PDIU-DS (XXX)
External
Modem Pool
See Figure A-7 for PDIU-DS
modem pool configuration
External modem must have the following AT
commands set:
(ATS0 = 1, ATB1_E0_L2_M1_Q1_V1_X4_Y0_&C1_&D2_&G0)
Turn off data compression.
Customer Strata DK
RSSU, RSIU,TSIU,
2
WSIU or RSIS
TTY
2
Port
PIOU, PIOUS
(SW3 – TTY Position)
3
PDKU
4
PDKU
0922
135
Advertisement
Table of Contents
