Dtmf Tone Dialing With And - Toshiba Strata DK User Manual

To call/monitor a door phone
1. With the handset
off-hook, press a
[DN].
2. Dial the [DN] for the
desired door location.
DTMF Tone Dialing with
You may have to send
voice mail device or computer output service. DTMF tones are automatically enabled
on stations with
, to enable these tones.
This feature disables the Speed Dial feature during the call. Speed Dial is restored
when you complete the call or place it on hold.
To output and
Press , then
Strata DK Electronic Telephone 5/00
You hear dial tone and the LED flashes (in-use).
A two-way talk-path exists between your telephone
and the called door phone. You can audibly monitor
the area around the door phone.
Note
and DTMF tones to some devices or services, such as a
and . If you do not have
DTMF tones on a telephone without a SDS/RDL button
You can now output
~ for the duration of the outside call. This
procedure must be repeated on each call when you
require such output.
Door phone [DNs] can be stored on
buttons. See "Speed Dial–Advanced Features"
on Page 63.
and #
and
and , DTMF tones, and digits
Features
DTMF Tone Dialing with
, you must first dial
and #
45