Toshiba Satellite A55 User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite A55
  6. User manual

Toshiba Satellite A55 User Manual

Toshiba user's guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Satellite
User's Guide
If you need assistance:
❖
Toshiba Global Support Centre
Calling within the United States (800) 457-7777
Calling from outside the United States (949) 859-4273
For more information, see
page 170
Handling the cord on this product will expose you to lead, a
chemical known to the State of California to cause birth defects
or other reproductive harm. Wash hands after handling.
®
A55 Series
in this guide.
"If Something Goes Wrong" on
PMAD00008011
08/04

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Satellite A55

Summary of Contents for Toshiba Satellite A55

  • Page 1 ® Satellite User’s Guide If you need assistance: ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 170 in this guide. Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
  • Page 2 AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DATA OR...
  • Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's parallel port, monitor port, USB port, PS/2 port port and microphone jack.

  • Page 4: Fcc Requirements

    (REN) for this equipment. If requested, the information must be provided to the telephone company. The modem connects to the telephone line by means of a standard jack called the USOC RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC part 68 rules and requirements adopted by the ACTA.

  • Page 5: Telephone Company Procedures

    If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
  • Page 6 Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.
  • Page 7 USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...

  • Page 8: Regulatory Information

    Wireless LAN device prior to turning on the equipment. Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
  • Page 9 ETS 300 328 Technical requirements for radio equipment ETS 300 826 General EMC requirements for radio equipment. English: Hereby, TOSHIBA Corp. Digital Media Network Company, declares that this Radio LAN device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
  • Page 10 Radio LAN device in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Bij deze TOSHIBA Corp. Digital Media Network Company dat deze Radio LAN device voldoet aan de essentiële eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC.
  • Page 11 Caution: Exposure to Radio Frequency Radiation The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized.
  • Page 12 Caution: Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 GHz to 5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.
  • Page 13 The interference range of this equipment is less than 40m. 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100...
  • Page 14 Approval Number: D01-1128JP TELECOM ENGINEERING CENTER Approval Number: 03NY.A0018, 03GZDA0017 The following restrictions apply: ❖ Do not disassemble or modify the device. ❖ Do not install the embedded wireless module into other device. ❖ 5.17 GHz to 5.23 GHz for indoor use only Radio approvals for wireless devices NOTE The following information is dependent on what type of wireless device is in...
  • Page 15 Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
  • Page 16 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Europe - Restrictions for use of 5 GHz Frequencies in European Community Countries European Community Countries Austria Belgium, France, Switzerland/Lichtenstein Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK...
  • Page 17 ❖ This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point. ❖ This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands.
  • Page 18 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Approved Countries/Regions for use for the Intel Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
  • Page 19 New Zealand Portugal Sweden Bluetooth wireless technology Interoperability Bluetooth™ Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ❖...
  • Page 20 Always use Bluetooth™ cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or http://www.pcsupport.global.toshiba.com in the United States for...

  • Page 21: Regulatory Statements

    community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of Bluetooth wireless technology may be restricted by the proprietor of the building or responsible representatives of the organization.
  • Page 22 The radiated output power of the Bluetooth™ Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth™ Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
  • Page 23 Article 17 Any use of low power radio frequency electric machinery shall not affect the aviation safety and interfere with legal communications. In event that any interference is found, the use of such electric machinery shall be stopped immediately, and reusing of such products can be resumed until no interference occurs after improvement.
  • Page 24 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916...
  • Page 25 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
  • Page 26 ConfigFree is a trademark of Toshiba Corporation. Wi-Fi is a registered trademark of the Wireless Capability Ethernet Alliance. Dolby - Manufactured by Toshiba under license from Dolby Laboratories/ Dolby and the double-D symbol are trademarks of Dolby Laboratories. TouchPad is a trademark of Synaptics, Inc.
  • Page 27 Computer disposal information This product contains mercury. Disposal of this material may be regulated due to environmental considerations. For disposal, reuse or recycling information, please contact your local government or the Electronic Industries Alliance at www.eiae.org.

  • Page 28: Table Of Contents

    Important information on your computer’s Setting up your computer ... 46 Setting up your software... 46 Registering your computer with Toshiba ... 47 Adding external devices ... 48 Connecting to a power source ... 48 Charging the main battery... 51...
  • Page 29 Using the computer for the first time ... 52 Opening the display panel ... 52 Your computer’s features and specifications... 53 Turning on the power ... 53 Using the TouchPad™ ... 54 Scrolling with the TouchPad™ ... 55 Using the Control buttons ... 55 Disabling or enabling the TouchPad...
  • Page 30 Caring for CD or DVD Discs ... 99 Powering down the computer ... 99 Using Turn Off or Shut Down... 100 Using Hibernation ... 103 Using Standby Mode... 105 Toshiba’s online resources... 107 ® special keys ... 81 components ... 91 ®...
  • Page 31 Chapter 3: Mobile Computing ... 108 Toshiba’s energy-saver design ... 108 Running the computer on battery power ... 108 Battery Notice ... 109 Power management ... 110 Using additional batteries ... 110 Charging the batteries... 111 Charging the main battery... 111 Charging the RTC battery...
  • Page 32 Inserting a PC Card ... 145 Removing a PC Card ... 146 Setting up a PC Card for your computer ... 146 Hot swapping... 147 Chapter 5: Toshiba Utilities ... 148 Fn-esse Starting Fn-esse Using the keyboard or pointing device to Viewing existing key assignments...
  • Page 33 Setting a supervisor password... 163 Deleting a supervisor password... 164 Using the TOSHIBA Zooming Utility... 165 Using the TOSHIBA Touch and Launch utility ... 166 Chapter 6: If Something Goes Wrong ... 170 Problems that are easy to fix ... 170 Problems when you turn on the computer...
  • Page 34 Contents Before you call ... 195 Contacting Toshiba ... 196 Other Toshiba Internet Web sites ... 197 Toshiba’s worldwide offices ... 197 Appendix A: Hot Keys ... 199 Volume Mute... 199 Instant password security... 200 Power usage profile ... 200 Stand By mode ...

  • Page 35: Introduction

    Your operating system offers exciting features and easy Internet access. This guide contains information about your operating system and how it functions with your Toshiba computer. For specific information on the software, see the Microsoft booklet that shipped with your computer.

  • Page 36: This Guide

    Toshiba's Web site at pcsupport.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/component/options availability are all subject to change without notice.

  • Page 37: Other Icons Used

    data. These safety cautions have been classified according to the seriousness of the risk, and the icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

  • Page 38: Other Documentation

    Service options Toshiba offers a full line of service options built around its Toshiba Services limited warranty programs. To stay current on the most recent software and hardware options for your...

  • Page 39: Chapter 1: Getting Started

    Chapter 1 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your computer. Selecting a place to work Your computer is designed to be used in a variety of locations and situations.

  • Page 40: Keeping Yourself Comfortable

    AC power source and let it dry out completely before turning it on again. If the computer does not operate properly after you turn it back on, contact a Toshiba service representative or your network administrator. Keeping yourself comfortable Strain and stress injuries are becoming more common as people spend more time using their computers.
  • Page 41 Placement of the computer Proper placement of the computer and external devices is important to avoid stress-related injuries. Consider the following when placing your computer. ❖ Place the computer on a flat surface at a comfortable height and distance. You should be able to type without twisting your torso or neck and look at the screen without slouching.
  • Page 42 Getting Started Selecting a place to work type comfortably with your shoulders relaxed and your forearms parallel to the floor. If you are using a conventional chair: ❖ Your knees should be slightly higher than your hips. If necessary, use a footrest to raise the level of your knees and ease the pressure on the back of your thighs.

  • Page 43: Other Precautions

    Arms and wrists ❖ Avoid bending, arching, or twisting your wrists. Keep them in a relaxed, neutral position while typing. ❖ Exercise your hands, wrists and arms to improve circulation. Work habits The key to avoiding discomfort or injury from strain is to vary your activities.
  • Page 44 Getting Started Selecting a place to work ❖ Avoid prolonged physical contact with the underside of the computer. If the computer is used for long periods, its case can become very warm. While the temperature may not feel too hot to the touch, if you maintain physical contact with the computer for a long time (if you rest the computer on your lap, for example), your skin might suffer low-heat injury.

  • Page 45: Important Information On Your Computer's Cooling Fan

    Information on disks is stored magnetically. Placing a magnet too close to a disk can erase important files. ❖ Scan all new files for viruses. This precaution is especially important for files you receive via email or download from the Internet. Occasionally, even new programs you buy from a supplier may contain a computer virus.

  • Page 46: Setting Up Your Computer

    Internet connectivity.” A window displays the message: “How will this computer connect to the Internet?” The system displays three selections: Telephone modem, Digital subscriber line (DSL) or cable, or local area network (LAN). before adding external “Connecting to a power source”...

  • Page 47: Registering Your Computer With Toshiba

    A window displays, asking if you wish to register with Toshiba and Microsoft. Click Yes to register, or No to exit the process. If you click No, you may register with Toshiba by clicking the NOTE Register with Toshiba icon on the desktop.

  • Page 48: Adding External Devices

    Getting Started Connecting to a power source Adding external devices Before adding external devices, Toshiba recommends setting NOTE up your software. See Before starting to use your computer, you may also want to: ❖ Add more memory (see (optional)” on page ❖...
  • Page 49 Use only the AC adapter supplied with your computer or an equivalent adapter that is compatible. Use of any incompatible adapter could damage your computer. Toshiba assumes no liability for any damage caused by use of an incompatible adapter.
  • Page 50 Getting Started Connecting to a power source Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. Plug the AC adapter into the DC-IN on the right side of the computer.

  • Page 51: Charging The Main Battery

    Damaged power cables can cause fire or electric shock. Never modify, forcibly bend, place heavy objects on top of, or apply heat to the power cable. If the power cable becomes damaged or the plug over- heats, discontinue use. There is a risk of electric shock. Never remove the power plug from the outlet with wet hands.

  • Page 52: Using The Computer For The First Time

    Getting Started Using the computer for the first time Battery life and charge time may vary depending on the NOTE applications, power management settings, and features used. Using the computer for the first time The computer is now ready for you to turn it on and begin using it.

  • Page 53: Your Computer's Features And Specifications

    Over a period of time, and depending on the usage of the NOTE computer, the brightness of the LCD Screen will deteriorate. This is an intrinsic characteristic of LCD technology. Screen will dim when the computer is operated on battery power and you may not be able to increase the brightness of the screen.

  • Page 54: Using The Touchpad

    Getting Started Using the TouchPad™ Press and hold the power button in until the on/off light on the system indicator panel glows green—about one second. Sample turning on the power The preinstalled operating system will load automatically. When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely.

  • Page 55: Scrolling With The Touchpad

    ❖ To move the cursor to the bottom of the page, drag your finger toward yourself. ❖ To move the cursor to the right side of the page, slide your finger across the TouchPad from left to right. ❖ To move it to the left side, slide your finger from right to left.

  • Page 56: Disabling Or Enabling The Touchpad

    Getting Started Using the TouchPad™ Disabling or enabling the TouchPad The TouchPad is enabled by default. To change the enable/ disable TouchPad setting: Click Start, Control Panel. The Control Panel window appears. Click Printers and Other Hardware. Click the Mouse icon or press the Fn + F9 hot keys. Click the TouchPAD ON/OFF tab.

  • Page 57: Installing Additional Memory (Optional)

    Additional memory comes in various capacities (to stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at accessories.toshiba.com). There are two memory slots. Depending on your system configuration, both slots may be occupied.
  • Page 58 Getting Started Installing additional memory (optional) Before you install or remove a memory module, turn off the computer using the Start menu. If you install or remove a memory module while the computer is in Standby or Hibernation mode, data will be lost. A memory module must be installed in slot A.
  • Page 59 Installing additional memory (optional) Unplug and remove any cables connected to the computer. Close the display panel and turn the computer upside down to locate the expansion memory module slot cover. Sample locating the memory module slot cover Remove the battery. For information on removing the battery, see “Changing the main battery”...
  • Page 60 Getting Started Installing additional memory (optional) Place the screw and the cover in a safe place so that you can retrieve them later. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.

  • Page 61: Removing A Memory Module

    Avoid touching the connectors on the memory module or on the computer. Grease or dust on the connectors may cause memory access problems. Replace the memory module slot cover. Retighten the screws. Turn the computer over and reconnect any cables you removed.

  • Page 62: Checking Total Memory

    Getting Started Installing additional memory (optional) Sample removing the memory module Complete the procedure by following steps 11 through 14 “Installing additional memory (optional)” on page Checking total memory When you add or remove a memory module, you can check that the computer has recognized the change.

  • Page 63: Using An External Keyboard

    Using an external keyboard If you prefer to use a full-size keyboard, you can attach one to your computer. The computer’s USB ports support any USB- compatible keyboard. To connect a USB keyboard, connect the keyboard cable to the USB port on the computer. Once connected, the keyboard is ready to use.

  • Page 64: Connecting A Local Printer

    Getting Started Connecting a local printer Connecting a local printer Before you can connect a printer, you need a suitable USB printer cable, which may have been provided with your printer. Otherwise, you can purchase one from a computer or electronics store.

  • Page 65: Setting Up Your Printer

    To connect the printer: If the computer is on, turn it off. Connect the printer cable to the printer and then connect the other end to one of the computer’s USB ports. Plug the printer’s power cable into a live electrical outlet. See your printer documentation for additional configuration steps.
  • Page 66 Getting Started Setting up your printer Sample Printers and Faxes window Click Add Printer. The Add Printer Wizard appears. Sample Add Printer Wizard dialog box Click Next.
  • Page 67 The Add Printer Wizard asks you to select your printer. TECHNICAL NOTE: If your printer is Plug and Play, the Windows XP operating system recognizes it automatically. You can ignore the remainder of this section. See your printer manual. If the printer you are setting up: ❖...

  • Page 68: Connecting An Optional External Diskette Drive

    Getting Started Connecting an optional external diskette drive ❖ The default printer, click Yes. ❖ Available when specifically requested, click No. Click Next. Click Finish. The Windows XP operating system prints a test page. To complete the setup, click OK. You are now ready to print.

  • Page 69: Using External Display Devices

    To connect an optional external USB diskette drive, connect the cable to one of the computer’s USB ports. Sample connecting an optional external USB diskette drive Using external display devices Your computer comes with a built-in LCD display, but you can also connect two different types of external display devices to one of two available video ports: ❖...
  • Page 70 For the best video quality, always use a properly shielded cable. HINT: Toshiba recommends using a cable no longer than 20 feet (approximately 6 meters). Using a poor quality cable may result in a dull or fuzzy picture, poor color, ghosting, video noise, or loss of video.

  • Page 71: Directing The Display Output When You Turn On The Computer

    “Directing the display output when you turn on the computer” on page TECHNICAL NOTE: If you are connecting to a television, you may need to change the display properties. Most televisions use or support an 800 x 600 standard resolution. Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen.

  • Page 72: Adjusting The Quality Of The External Display

    Getting Started Using external display devices ❖ External monitor only ❖ Built-in display and TV (or other external video device) simultaneously ❖ TV (or other external video device) only Release the TECHNICAL NOTE: You can also change these settings using the Display Properties Box.

  • Page 73: Turning Off The Computer

    Turning off the computer It is a good idea to turn off your computer when you are not using it for a while. If you are using the computer for the first time, leave the computer plugged into a power source (even though the computer is off) to fully charge the main battery.

  • Page 74: Closing The Display Panel

    To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth. Ask your Toshiba dealer for suggestions for appropriate cleaning products. “Running the computer on battery 108.

  • Page 75: Moving The Computer

    Although your notebook computer is built to withstand reasonable shock and vibration, transport it in a carrying case for long trips. You can purchase a carrying case from your Toshiba dealer, through the accessories information packaged with your system, or visit accessories.toshiba.com. Using a computer lock For your own peace of mind, you may want to secure your computer to a heavy object such as your desk.
  • Page 76 Getting Started Caring for your computer Insert the cable’s locking end into the security lock slot on the left side of the computer, then give the key a quarter turn and remove it. The computer is now securely locked. Sample locking the computer...

  • Page 77: Chapter 2: Learning The Basics

    Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
  • Page 78 Learning the Basics Computing tips ❖ Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy.

  • Page 79: Using The Keyboard

    Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows keys, providing all the functionality of a full-size keyboard. Sample keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖...

  • Page 80: Ctrl, Fn, And Alt Keys

    Learning the Basics Using the keyboard of the specially marked keys allows you to emulate a full-size keyboard. Your computer’s keyboard has only one Most of the time, this does not matter. However, some programs assign separate functions to the right and left keys, or to the regular and numeric pad the full-sized keyboard.

  • Page 81: Windows ® Special Keys

    ® Windows special keys Sample Windows special keys Your computer’s keyboard has two keys that have special functions in Windows: ❖ Start key—Opens the Start menu ❖ Application key—Has the same function as the secondary mouse (or AccuPoint II) button Overlay keys The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay.
  • Page 82 Learning the Basics Using the keyboard Using the overlay to type numeric data The keys with the numbers on their right front are the numeric overlay keys. To turn the numeric overlay on, press simultaneously. The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on.

  • Page 83: Starting A Program

    Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use My Computer or Windows Explorer. If you prefer to open the program first, you have four options. You can: ❖...

  • Page 84: Starting A Program From Windows Explorer

    Learning the Basics Starting a program Starting a program from Windows If a program is not listed in the Programs menu, you can start it from Windows Explorer. Windows Explorer gives you a view of your computer’s contents as a hierarchy or “tree.” You can easily see the content of each drive and folder on your computer.

  • Page 85: Starting A Program From The Run Dialog Box

    Starting a program from the Run dialog box This example uses the Run command to start WordPad: Click Start, then click Run. The Run dialog box appears. Sample Run dialog box In the Run dialog box: ❖ If you know the program’s location, type the command line.

  • Page 86: Saving Your Work

    Learning the Basics Saving your work Saving your work Before you turn off the computer, save your work on the hard disk drive or a diskette. Always save your data even when you are using the Stand by. If your battery fully discharges, your information will be lost. Your computer can be configured to warn you when the battery is running low, see Many programs offer a feature that saves documents at...
  • Page 87 Choose the drive and folder where you want your file to be stored. Type a file name, then click Save. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.

  • Page 88: Printing Your Work

    Learning the Basics Printing your work Printing your work Verify that the Windows XP operating system is set up for your printer as described in page TECHNICAL NOTE: You only need to set up the printer the first time you connect it. If you use more than one printer or are changing printers, you will need to set up the operating system to run with the additional printer(s).

  • Page 89: Backing Up Your Work

    Backing up your work Backing up your files means copying individual files to media, such as CDs, or copying entire sections of your hard disk to another device, such as a tape drive. For those systems with a writable CD-ROM drive or DVD- ROM multi-function drive, you may back up file to a writable disc as follows: To back up to a CD or other media, insert the media into...

  • Page 90: Restoring Your Work

    Learning the Basics Using the DVD-ROM or multi-function drive Restoring your work To restore information from your backup media to your hard disk, use the Restore page in the backup program. Look in the online Help or your operating system documentation for information on restoring files.

  • Page 91: Drive Components And Control Buttons

    Using the DVD-ROM or multi-function drive NOTE For optimum CD and DVD performance, it is recommended that you play CDs and DVDs while running the computer on AC power. You use CD-ROMs and DVD-ROMs to load and run software, and to access reference material such as catalogs, as well as listen to music.

  • Page 92: Cd/Dvd Control Buttons

    Learning the Basics Using the DVD-ROM or multi-function drive Do not press the eject button or turn off the computer while the Drive in-use indicator light is glowing. Doing so could damage the disc or the drive. When the disc tray is open, be careful not to touch the lens or the area around it.

  • Page 93: Inserting A Compact Disc

    Using the DVD-ROM or multi-function drive The stop/eject button stops a disc that is currently playing. You can eject a disc by pressing the stop/eject button twice. Use this method to eject a disc when the computer is turned off and the sound subsystem is turned on. Inserting a compact disc To insert a compact disc into the drive: Make sure the computer is turned on.
  • Page 94 Learning the Basics Using the DVD-ROM or multi-function drive Hold the disc by its edges and check that it is clean and free of dust. Handle discs carefully. Avoid touching the surface of the disc. Grasp it by its center hole and edge. If you handle the disc incorrectly, you could lose data.

  • Page 95: Playing An Audio Cd

    If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.

  • Page 96: Playing Cds Using Auto-Run

    Learning the Basics Using the DVD-ROM or multi-function drive Sample Windows Media Player screen The Windows Media Player control panel works much like an ordinary compact disc player: ❖ To play the CD or to pause, click the Play/pause button on the CD Player control panel.

  • Page 97: Creating A Cd

    Using the DVD-ROM or multi-function drive Click the DVD-ROM/multi-function drive icon. The disk drive will run the CD. If your disk does not run using this method, try using an application that is associated with the media on the disk. For example, if it is a music CD, open Windows and point it to play the CD.

  • Page 98: Removing A Disc With The Computer On

    Learning the Basics Using the DVD-ROM or multi-function drive Removing a disc with the computer on To remove a compact disc (CD or DVD) with the computer turned on: Never press the eject button or turn off the computer while the in-use indicator light is glowing.

  • Page 99: Caring For Cd Or Dvd Discs

    Gently push the tray in to close it. Caring for CD or DVD Discs ❖ Store your discs in their original containers to protect them from scratches and keep them clean. ❖ Do not bend a disc or place heavy objects on top of it. ❖...

  • Page 100: Using Turn Off Or Shut Down

    Learning the Basics Powering down the computer TECHNICAL NOTE: Before using any of these options to power down your computer, save your files and make sure the disk activity lights are off. If you change your mind and decide to continue working after all, wait a few seconds before turning the computer on again.
  • Page 101 Shutting down more quickly In addition, you can shut down the computer by pressing the power button. To use either of these methods, you first need to turn it on in Toshiba’s Power Saver utility. Learning the Basics Powering down the computer 103.
  • Page 102 Learning the Basics Powering down the computer Open the Start menu, click Control Panel, then Performance and Maintenance. Click the Toshiba Power Saver icon. Click on the Setup Action tab. Select the options you want from the drop-down lists. ❖...

  • Page 103: Using Hibernation

    Starting again after Shut down To start the computer up again, press the power button until the on/off light changes to green. If you shut down the computer by closing the display panel, you can start it again by opening the display panel. Using Hibernation Hibernation mode shuts the computer down completely, but it first saves the current mode of the computer to the hard disk.
  • Page 104 Learning the Basics Using Hibernation Click the Toshiba Power Saver icon. Click the Setup Action tab. Select Hibernation for the options you want. ❖ When I press the power button Set this option to Hibernate so that the computer will go into Hibernation mode when you press the power button.

  • Page 105: Using Standby Mode

    Using Standby Mode Standby mode places the computer into a power-saving state. Standby holds the current mode of the computer in memory so that, when you restart the computer, you can continue working from where you left off. Factors to consider when choosing Standby: ❖...
  • Page 106 You can also specify an amount of time after which the computer automatically enters into Standby mode. To use either of these methods, you first need to configure them in Toshiba’s Power Saver utility. Open the Start menu, click Control Panel then Performance and Maintenance.

  • Page 107: Toshiba's Online Resources

    Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.

  • Page 108: Chapter 3: Mobile Computing

    Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods of time while traveling.

  • Page 109: Battery Notice

    Toshiba Web site at accessories.toshiba.com. To ensure that the battery maintains its maximum capacity, operate the computer on battery power at least once a month until the battery is fully discharged.

  • Page 110: Power Management

    For assistance with setup changes, contact Toshiba’s Global Support Centre. Using additional batteries If you spend a lot of time traveling and need to work for many hours without an AC power source, you may want to carry additional charged batteries with you.

  • Page 111: Charging The Batteries

    Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com. Charging the main battery To charge the main battery while it is in your computer, plug the computer into a live electrical outlet.

  • Page 112: Charging The Rtc Battery

    Mobile Computing Charging the batteries The battery may not start charging immediately under the following conditions: ❖ The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature. ❖...

  • Page 113: Monitoring Battery Power

    It is seldom necessary to charge the RTC battery because it NOTE charges while the computer is on. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date or stop working. When Hibernation mode is enabled and the RTC battery is completely discharged, a warning prompts you to reset the real-time clock.

  • Page 114: Determining Remaining Battery Power

    Click the Toshiba Power Saver icon. The current power source and battery power remaining section displays the current charge state of the battery. The value displays as a percentage of remaining battery charge. Sample Toshiba Power Saver Properties Dialog Box...

  • Page 115: What To Do When The Battery Runs Low

    The remaining battery charge is indicated on the top-left side of the dialog box. With repeated discharges and recharges, the battery’s capacity gradually decreases. A frequently used older battery does not power the computer for as long as a new battery, even when both are fully charged.

  • Page 116: Setting Battery Alarms

    To change the default alarm settings: Open the Start menu, click Control Panel, then Performance and Maintenance. Click the Toshiba Power Saver icon. Click the Setup Action tab. Select the Alarm settings in the Setup Alarm section. Before your computer runs out of battery power, save your data and take one of the following actions: ❖...

  • Page 117: Power Profiles In Windows ® Xp

    By using them, you can greatly increase the length of time you can use the computer before you need to recharge the battery. Toshiba has combined these options into preset power usage modes or profiles. Power profiles in Windows...

  • Page 118: Using A Hot Key To Set The Power Profile

    Release the The pop-up window disappears. You are now in the selected mode. For more information on setting the battery power profile, see “TOSHIBA Power Saver” on page simultaneously to display the power profile key. , press until you select the...

  • Page 119: Changing The Main Battery

    Changing the main battery When your battery power is running low, you have two options—connect the computer to an AC power source or install a charged battery. When handling a battery, be careful not to drop it or short- circuit its terminals. Also, do not drop, hit, or otherwise impact the battery.
  • Page 120 Mobile Computing Changing the main battery If the battery lock is in the locked position, slide it toward the unlocked position. Sample sliding the battery lock to the unlocked position Slide and hold down the battery release latch. While holding the battery release latch, pull the discharged battery out from the back of the computer.

  • Page 121: Inserting The Battery Into The Computer

    Inserting the battery into the computer Assuming you just removed the battery pack (see the battery from the computer” on page Place the battery pack in the battery compartment. If the battery does not slide into the slot easily, move the battery release lock to the unlocked position and try again.

  • Page 122: Maximizing Battery Life

    If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. ❖ To replace the main battery, use an identical battery that you can purchase through to Toshiba Web site at accessories.toshiba.com. ❖ A reverse polarity condition should be avoided with all batteries.

  • Page 123: Disposing Of Used Batteries

    pack is fully discharged. If the battery light LED flashes or there is some other warning to indicate a low battery, go to step 4. Connect the AC adapter to the computer and the power cord to a power outlet. The DC-IN or AC power-light LED should glow green, and the Battery LED should glow amber to indicate that the battery pack is being charged.

  • Page 124: Traveling Tips

    ❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cables, and compact discs. Contact your authorized Toshiba representative for more information.

  • Page 125: Chapter 4: Exploring Your Options

    Chapter 4 Exploring Your Options In this chapter, you will explore some of the special features of your Satellite Exploring the desktop The desktop is the launching pad for everything you can do in the Windows XP Home or XP Professional operating system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks.

  • Page 126: Finding Your Way Around The Desktop

    Exploring Your Options Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, taskbar, system tray, and background pattern. Icons Start button Sample Windows XP operating system desktop Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
  • Page 127 Recycle Bin — Holds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin. TECHNICAL NOTE: If you delete a file from a diskette, it does not go into the Recycle Bin. For more information on the Recycle Bin, see Windows online Help.

  • Page 128: System Tray

    Exploring Your Options Exploring the desktop Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.

  • Page 129: Setting Up For Communications

    Internet To stay current on the most recent software and hardware NOTE options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at accessories.toshiba.com. Exploring Your Options Setting up for communications...
  • Page 130 Exploring Your Options Setting up for communications Determining the COM port Your modem is connected to one of the computer’s COM (communications) ports. The default setting for the modem is COM3. The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings.

  • Page 131: Connecting Your Modem To A Telephone Line

    Send a fax directly from your computer. For more detailed information regarding your computer’s modem, visit Toshiba’s Web site at accessories.toshiba.com. Plug one end of a telephone cable (purchased separately) into the modem port on the back of the computer.

  • Page 132: Connecting Your Computer To A Network

    Sample connecting to a wall jack The modem is designed for use with a standard analog telephone line. Do not connect the modem to a digital telephone line. A digital line will damage the modem. Now you are ready to send a fax or use the modem to connect to an online service or the Internet.
  • Page 133 To avoid this delay, you can reconfigure Windows to disable the LAN port. TECHNICAL NOTE: You can also use ConfigFree to reconfigure Windows to disable the LAN port. For procedures, “Using ConfigFree™ with your Toshiba Computer” on page 206. Exploring Your Options...
  • Page 134 Exploring Your Options Setting up for communications To disable the LAN port: Click Start, click Control Panel then Performance and Maintenance. Click the System icon, then click the Hardware tab, and then click the Device Manager button. Select Intel Network adapters. Click Actions.

  • Page 135: An Overview Of Using The Internet

    Your computer may have an integrated Wi-Fi Wireless LAN Mini PCI module. It is recommended that you do not remove the module from your computer. For assistance, contact a Toshiba Wireless Authorized Service Partner. For systems equipped with Wi-Fi, flip the wireless on/off switch to the On position.

  • Page 136: The World Wide Web

    Internet connection. You can connect to the Internet by using a telephone and modem or through other higher-speed communication methods such as Digital Subscriber Lines (DSL), cable, and satellite links.

  • Page 137: Surfing The Internet

    Connect your computer’s modem to a telephone line. For more information on connecting a modem, see “Connecting your modem to a telephone line” on page Start your Web browser. Have your modem dial the ISP’s telephone number, and establish a connection with the ISP’s computer.

  • Page 138: Uploading And Downloading Files From The Internet

    Exploring Your Options Exploring audio features If you have an account with an ISP, you can probably set up an email address at the same time you sign up for the service. ❖ Internet chat rooms A chat room is a Web site that offers a place where people with similar interests and ideas communicate in real-time, one-on-one or in groups, by typing messages which are instantly viewed by others on their computer screens.

  • Page 139: Recording Sounds

    Recording sounds You may record sounds as .wav files by connecting an external microphone or other sound source to the microphone jack. DEFINITION: A .wav (pronounced “wave”) file is a Windows format for storing sound. TECHNICAL NOTE: If you record MP3 files, you will only be able to play them on a device capable of playing MP3 files.

  • Page 140: Using External Speakers Or Headphones

    Exploring Your Options Exploring audio features The Sound Recorder window displays the new sound file as a waveform. You can only record 60 seconds at a time. NOTE To hear what you just recorded, click the Play button. To save the file, select Save from the File menu. Adjusting recording quality The better the quality of the recording, the more disk space the sound file requires.

  • Page 141: Using The I.link ® Port

    TECHNICAL NOTE: Use amplified speakers that require an external power source. Other types of speakers will be inadequate to produce sound from the computer. To play back sound files through external speakers or headphones: Locate the headphone jack on the computer. Using any necessary adapters, plug the cable from the headphones or external speakers into the headphone jack.

  • Page 142: Inserting And Removing Hard Drives

    Exploring Your Options Inserting and removing hard drives Inserting and removing hard drives Your Satellite Depending upon the original hard drive installed in your computer, you may wish to increase storage capacity by changing the internal drive. To change the internal hard drive: Shut down your computer completely using the Shut Down command.
  • Page 143 Inserting and removing hard drives Grasp the edge of the hard drive and pull it toward the edge of the computer, then lift it straight up to remove it. Sample removing the hard drive from the computer Install the new hard drive by setting it into the hard drive slot and sliding back toward the center of the computer until it locks.

  • Page 144: Inserting And Removing Pc Cards

    Exploring Your Options Inserting and Removing PC Cards Inserting and Removing PC Cards PC Cards expand your computer’s capabilities and usefulness. You can purchase additional PC Cards from your dealer. Most PC Cards conform to the PCMCIA (Personal Computer Memory Card International Association) standard. Your Satellite Card slot and supports two types of PC Cards: Type I cards—You can install one of these cards.

  • Page 145: Inserting A Pc Card

    Inserting a PC Card Use caution when lifting or turning your computer. Failure to NOTE do so may result in damage to components, such as cables, attached to your computer, or to the computer itself. Before you insert a PC Card, refer to the documentation that comes with the card to see if you need to do anything before you insert it.

  • Page 146: Removing A Pc Card

    Exploring Your Options Inserting and Removing PC Cards When the card is almost all the way into the slot, push firmly, but gently, to ensure a firm connection with the computer. To avoid damaging the PC Card or the computer, do not force the card into the PC Card slot.

  • Page 147: Hot Swapping

    To set up your PC Card, refer to the documentation that came with the card or refer to your operating system manual or online help. Hot swapping With PC Cards, you can replace one PC Card with another while the computer is on. This is called “hot swapping.” Hot swapping precautions Although you can insert a PC Card at any time, to avoid data loss never remove a card while it is in use.

  • Page 148: Chapter 5: Toshiba Utilities

    Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to determine certain system details, set additional options, or change default options. This chapter describes the utilities supplied by Toshiba: ❖ Fn-esse® ❖...

  • Page 149: Fn-Esse

    You can assign any key that is not associated with a hot key or a keyboard overlay. Starting Fn-esse ® Click Start, point to All Programs, Toshiba Utilities, then click Fn-esse. The Fn-esse keyboard appears. Sample Fn-esse window Toshiba Utilities key combination to: 199.
  • Page 150 Toshiba Utilities Fn-esse® The keys are color-coded as follows: ❖ Available keys are dark gray with white letters. ❖ Assigned keys and keys associated with a popup list are shown on the Fn-esse keyboard in the selected color. ❖ Unavailable keys are light gray.

  • Page 151: Using The Keyboard Or Pointing Device To Assign Keys

    Making a direct key assignment Select Direct... to display the Add/Edit Command dialog box. Enter the Description, Command Line, and Working Directory for the new Fn-esse key assignment, or click Browse to specify this information. Click OK. Toshiba Utilities Fn-esse® key, then press plus...

  • Page 152: Viewing Existing Key Assignments

    Toshiba Utilities Fn-esse® Making a popup assignment Select Popup... to display the Application Explorer dialog box. Select the desired folder. The left side of the Application Explorer window displays the folders in the Programs menu. The right side lists the programs and documents in the folder.

  • Page 153: Changing Or Removing Existing Key Assignments

    ❖ To remove the key assignment, click Clear. TOSHIBA Console The TOSHIBA Console provides quick access to computer functions and allows you to customize a range of computer settings. To access the control panel: Click Start, then click All Programs.

  • Page 154: Customizing Your Computer

    The features available in this category are: ❖ Supervisor password ❖ User password TOSHIBA Power Saver The TOSHIBA Power Saver feature enables you to control your computer’s power usage, regardless of the source, and use the many preset power modes, or create one yourself. 149)
  • Page 155 You can either use one of the preset modes or create and use your own customized profile. The preset profiles cannot be deleted. By changing the options that appear in the Toshiba Power Saver Properties window and clicking OK, you can reconfigure that function. Any options that you change...
  • Page 156 Toshiba Utilities TOSHIBA Console Profiles This section lists the preset profiles along with the estimated battery life for each mode. The preset profiles are: ❖ Full Power ❖ High Power ❖ Normal ❖ DVD Playback ❖ Presentation ❖ Long Life Although you can change the properties for any of these profiles, this is not recommended.

  • Page 157: Mouse Utility

    Hotkey combination for Standby ] and Hibernation [ Fn+F3 To activate: Click Start, All Programs, Toshiba, Utilities, then click the Hotkey utility. The Toshiba Hotkey window appears. Sample Toshiba Hotkey utility window Select the desired option.

  • Page 158: Toshiba Hw Setup

    TOSHIBA HW Setup is the Toshiba configuration management tool available through Windows. To access it, open the Start menu, click Control Panel, then Printers and Other Hardware. Then click the Toshiba HWSetup icon. Sample TOSHIBA HWSetup window The tabs represent various dialog boxes. They are: ❖...
  • Page 159 By changing any of the options that appear in the dialog boxes and clicking Apply, you can reconfigure that function. Any options that you change will become default settings when you restart your system. Toshiba Utilities TOSHIBA Console function key and access the...

  • Page 160: Enabling Hibernation

    Toshiba Utilities Enabling Hibernation Enabling Hibernation Your computer includes a Toshiba Power Saver utility that allows you to change many of your default power settings. You can enable hibernation through this utility. To power down the computer using the Hibernation option, click Start, select Turn off computer.

  • Page 161: Using An Instant Password

    An instant password has no effect on an optional USB mouse or trackball. To unlock your system, press any key or the TouchPad and the Windows Logon screen appears. Select your user name and enter your password, if any. Toshiba Utilities Setting passwords , then press . This...

  • Page 162: Setting A User Password

    Setting a user password To register a password for the power-on password functions: Click Start, the click All Programs. Point to TOSHIBA Console, then click the resulting TOSHIBA Console selection. The TOSHIBA Console window appears. On the left side, select Security.

  • Page 163: Setting A Supervisor Password

    To register a password for the power-on password functions: Click Start, the click All Programs. Point to TOSHIBA Console, then click the resulting TOSHIBA Console selection. The TOSHIBA Console window appears. On the left side, select Security.

  • Page 164: Deleting A Supervisor Password

    Click OK. Deleting a supervisor password To cancel the power-on password function: Click Start, the click All Programs. Point to TOSHIBA Console, then click the resulting TOSHIBA Console selection. The TOSHIBA Console window appears. On the left side, select Security.

  • Page 165: Using The Toshiba Zooming Utility

    Microsoft Internet Explorer, ® ® Microsoft Office, Windows Media Player, and Adobe Reader. To access the utility, click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Zooming Utility. The TOSHIBA Zooming Utility screen appears. Sample TOSHIBA Zooming Utility screen...

  • Page 166: Using The Toshiba Touch And Launch Utility

    A blue circle within the TOSHIBA Touch and Launch window represents your finger location on the TouchPad. As you move the blue circle over an icon in the TOSHIBA Touch and Launch window, the icon is highlighted or selected. Release your finger from a selected icon to choose the icon's function.
  • Page 167 To close the TOSHIBA Touch and Launch window, release your finger when the blue circle is not on any icon. Or, highlight the Close icon in the upper right of the TOSHIBA Touch and Launch window. The TOSHIBA Touch and Launch window has the following...
  • Page 168 TOSHIBA Touch and Launch is controlled/adjusted via an icon on the system tray. The icon will change color when the TOSHIBA Touch and Launch is active. Double-click the icon to open the TOSHIBA Touch and Launch Settings window. Right-click the icon to see the following shortcut menu: ❖...
  • Page 169 The Option button allows you to define how folders will open, define visual affects and control when to show help. A list of tables appears in the Table section of the TOSHIBA Touch and Launch Settings window. These are the same items (icons) you can choose in the Corner Assignment section of the TOSHIBA Touch and Launch Settings.

  • Page 170: Chapter 6: If Something Goes Wrong

    This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
  • Page 171 Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working.

  • Page 172: Problems When You Turn On The Computer

    If Something Goes Wrong Problems when you turn on the computer Add a paragraph break and type some notes describing what you were doing when you received the message. Save the file and refer to it when you contact the software manufacturer.

  • Page 173: The Windows Operating System Is Not Working

    The Windows The computer displays the message. The computer was placed in Stand By mode and the battery has discharged. Data stored in the computer’s memory has been lost. To charge the battery, leave the computer plugged into a live wall outlet for several hours.

  • Page 174: Using Startup Options To Fix Problems

    If Something Goes Wrong The Windows Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu.

  • Page 175: Internet Problems

    The Windows See your Windows documentation for further explanation. TECHNICAL NOTE: If your computer is connected to a network, the Startup menu may display different versions of Safe mode. Internet problems These are some typical problems and recommended solutions: My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet.

  • Page 176: Resolving A Hardware Conflict

    If Something Goes Wrong Resolving a hardware conflict To access Windows XP Help and Support: Click Start, then click Help and Support. The Help and Support Centre window appears. Then do one or both of the following: ❖ In the search field, type in the topic of the problem with which you need help and follow the on-screen instructions.

  • Page 177: Resolving Hardware Conflicts On Your Own

    If Something Goes Wrong Resolving a hardware conflict The recommended procedure for getting multiple devices to work together is to add and set up one device at a time. After you add each device, test it to make sure it and all previously connected devices work.

  • Page 178: Fixing A Problem With Device Manager

    If Something Goes Wrong Resolving a hardware conflict Play-compliant, no two devices will compete for the same system resources. Simply plug in the device and turn on your computer. The operating system automatically sets up your system to accommodate the new device. If you install an older (legacy) device that the operating system cannot recognize, the operating system may have difficulty assigning resources to it.
  • Page 179 Disabling a device Open the Start menu, click Control Panel then Performance and Maintenance. Click the Administrative Tools icon. Click Computer Management and then Device Manager. Select the specific device from the device category. In the toolbar, look to the far right for an icon of a monitor with a strike mark through a circle on the front.

  • Page 180: Memory Problems

    If Something Goes Wrong Resolving a hardware conflict ❖ The General tab, which provides basic information about the device. ❖ The Resource tab, which lists resources assigned to the monitor, DVD-ROM, multi-function drive, disk drive, and other functions that consume power. ❖...

  • Page 181: Power And The Batteries

    If removing the memory module eliminates the error, the memory module may be faulty. If the error recurs without the memory module installed, the error is not caused by the memory module. TECHNICAL NOTE: You must have a least one memory module installed for the computer to work.

  • Page 182: Keyboard Problems

    If Something Goes Wrong Resolving a hardware conflict The battery may be too hot or too cold to charge properly. If you think this is the probable cause, let the battery reach room temperature and try again. If the battery has completely discharged, it will not begin charging immediately.

  • Page 183: Display Problems

    If the problem occurs when both the keypad overlays are off, make sure the software you are using is not remapping the keyboard. Refer to the software’s documentation and check that the program does not assign different meanings to any of the keys.
  • Page 184 If Something Goes Wrong Resolving a hardware conflict ❖ Check that the cable connecting the external monitor to the computer is firmly attached. ❖ Try adjusting the contrast and brightness controls on the external monitor. ❖ Press priority is not set for the built-in screen. The screen does not look right.

  • Page 185: Disk Drive Problems

    Click Properties, then click the Settings tab. Adjust the screen resolution and/or color quality. Click OK. The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher.
  • Page 186 If Something Goes Wrong Resolving a hardware conflict You are having trouble accessing a disk, or one or more files appear to be missing. Make sure you are identifying the drive by its correct name (A: or C:). Error-checking Run Error-checking, which analyzes the directories, files and File Allocation Table (FAT) on the disk and repairs any damage it finds: To run Error-checking:...
  • Page 187 Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software, which is available from your dealer. Some programs run correctly but others do not.

  • Page 188: Dvd-Rom Or Multi-Function Drive Problems

    If Something Goes Wrong Resolving a hardware conflict DVD-ROM or multi-function drive problems These are some typical problems and recommended solutions: You cannot access a disc in the drive. Make sure the drive tray has closed properly. Press gently until it clicks into place. Open the drive tray and remove the disc.

  • Page 189: Sound System Problems

    Sound system problems These are some typical problems and recommended solutions: You do not hear any sound from the computer. Adjust the volume control. If you are using external headphones or speakers, check that they are securely connected to your computer. The computer emits a loud, high-pitched noise.
  • Page 190 If Something Goes Wrong Resolving a hardware conflict CIS contains enough information for you to use the card immediately. Other cards must be set up before you can use them. Use the Windows XP PC Card (PCMCIA) Wizard to set up the card. Refer to your Microsoft information, or refer to the documentation that came with the PC Card.
  • Page 191 Resolving PC Card problems These are some typical problems and recommended solutions: The slots are not working. PC Cards that used to work no longer work. Check the PC Card status: Click Start. Click the My Computer icon with the secondary button, then click Properties.

  • Page 192: Printer Problems

    If Something Goes Wrong Resolving a hardware conflict Double-click the PC Card icon on the taskbar. Click Safely remove xxxx, where xxxx is the identifier for your PC Card. The operating system displays a message that you may safely remove the card. Remove the card from the slot.

  • Page 193: Modem Problems

    These are some typical problems and recommended solutions: The modem will not receive or transmit properly. Make sure the cable from the modem to the telephone line is firmly connected to the computer’s modem port and the telephone line jack.

  • Page 194: Develop Good Computing Habits

    The modem is on, set up properly and still will not transmit or receive data. Make sure the line has a dial tone. Connect a telephone handset to the line to check this. The other system may be busy or off line. Try making a test transmission to someone else.

  • Page 195: If You Need Further Assistance

    Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first. Try the following before contacting Toshiba: ❖ Review the troubleshooting information in your operating system documentation.

  • Page 196: Contacting Toshiba

    GO, and then clicking the Detailed Specs link from the menu on the left, or just refer to the computer documentation shipped with your product. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba...

  • Page 197: Other Toshiba Internet Web Sites

    Information about what you were doing when the problem occurred. ❖ Exact error messages and when they occurred. For technical support, call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com...
  • Page 198 Henares Spain United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm. Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome Minato-Ku, Tokyo, 105-8001 Japan Mexico Toshiba de México S.A.

  • Page 199: Appendix A: Hot Keys

    Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.

  • Page 200: Instant Password Security

    The power usage profiles are: Full Power, High Power, Normal, DVD Playback, Presentation, and Long Life. Sample power usage modes The properties of each mode are set in the Toshiba Power Management utility. For more information, see “Mobile Computing” on page 108.

  • Page 201: Stand By Mode

    Stand By mode This hot key places the computer into Stand By mode. A message box is displayed by default to confirm that the computer is going into Stand By mode. This message box can be set so it does not display. Sample Stand By confirmation box For more information about Stand By mode, please see “Using Standby Mode”...

  • Page 202: Hibernation Mode

    Hot Keys Hibernation mode Hibernation mode This hot key places the computer into Hibernation mode. If Hibernation mode is enabled (the default) a message box is displayed by default to confirm the computer is going into Hibernation mode. The message box can be set so it does not display.

  • Page 203: Display Modes

    Display modes This hot key cycles through the power-on display options. The display modes are: Sample display options window To use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device. ❖...

  • Page 204: Display Brightness

    Hot Keys Display brightness Display brightness This hot key decreases the screen brightness. This hot key increases the screen brightness. Disabling or enabling the TouchPad This hot key enables/disables the TouchPad. To use the TouchPad, see page Sample disable and enable TouchPad windows Keyboard hot keys This hot key turns the cursor control overlay on and off.

  • Page 205: Appendix B: Power Cable Connectors

    Appendix B Power Cable Connectors The computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved United Kingdom...

  • Page 206: Appendix C: Using Configfree™ With Your Toshiba Computer

    Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks.

  • Page 207: Getting Started

    Networking, ConfigFree. ❖ Double-click the ConfigFree icon ❖ Press the Toshiba Console button (if applicable to your system) to open the Toshiba Console, and then click the ConfigFree icon. ❖ Click the ConfigFree icon click the desired utility. If your computer is not connected to a network, the ConfigFree NOTE icon on the taskbar is displayed with an “X.”...

  • Page 208: Configfree Utilities

    Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample ConfigFree Launcher ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network-connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer.
  • Page 209 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as its IP address, subnet mask, and MAC address. A wireless network device also shows information such as the network SSID and the device’s Wired Equivalent Privacy (WEP) key...
  • Page 210 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities If a problem, or potential problem, is detected, a triangle containing an exclamation point appears in the Connectivity Doctor screen and an orange frame describes the relevant location. You can then view a possible cause and solution for the problem by clicking the exclamation point.

  • Page 211: Search For Wireless Devices

    Using ConfigFree™ with your Toshiba Computer Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN devices and Bluetooth devices currently used in the neighborhood, and displays information about them on a virtual map. To search for wireless devices: Click the Click Search for Wireless Devices.
  • Page 212 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample viewing Wi-Fi devices The following screen shows an example of Bluetooth devices that are detected. As with the Wi-Fi screen, moving the mouse pointer over a device icon displays information about the device.

  • Page 213: Profile Settings

    Using ConfigFree™ with your Toshiba Computer Click your own computer at the center of the map. Configured devices are automatically connected. Devices not yet configured launch the Add New Connection Wizard, where you can configure and connect to the device.
  • Page 214 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ❖ Personal firewall settings for Internet connections. ❖ Dial-up connection settings for the default connection. ❖ File and printer sharing settings. ❖ Printer settings for the default printer. To create a profile: Click the Move the pointer to Profile.

  • Page 215: Quick Connect

    Quick Connect The Quick Connect feature switches the Wireless LAN connection to connect to a Toshiba Wireless Projector. Once the projector utility is installed, launching the Quick Connect utility automatically opens the Wireless Data Projector Application.
  • Page 216 (DPJ), then click Connect. Launching Quick Connect prevents you from using the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad hoc. If you are connected to an access point, the connection is broken and re- established later.
  • Page 217 Quick Connect function was started: ❖ If the Toshiba Wireless Projector utility is closed. ❖ If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this disconnects the wireless LAN connection). ❖ If you select a profile from the ConfigFree tray menu or when you disable a wireless device.

  • Page 218: Using The Automatic Switch

    Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home.

  • Page 219: Semi-Automatic Switch Feature

    Using ConfigFree™ with your Toshiba Computer Semi-Automatic Switch Feature The Semi-Automatic feature alerts you when the computer connects to a Service Set Identifier (SSID) stored in a profile, When the computer connects to the designated SSID, a notification window appears. You can then click this window to connect using the settings specified in the profile.

  • Page 220: Glossary

    Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms These acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory complementary metal-oxide semiconductor...
  • Page 221 direct current direct memory access DIMM dual inline memory module disk operating system dots per inch DSTN dual supertwist nematic digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory enhanced capabilities port EPROM erasable programmable read-only memory file allocation table Federal Communications Commission fast infrared...
  • Page 222 Glossary PCMCIA SCSI DDRAM SRAM SVGA Terms These terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
  • Page 223 alternating current (AC) — The type of power usually supplied to residential and commercial wall outlets. AC reverses its direction at regular intervals. Compare direct current (DC). application — A computer program that you use to perform tasks of a specific type.
  • Page 224 Glossary bus — An electrical circuit that connects the central processing unit (CPU) with other parts of the computer, such as the video adapter, disk drives, and ports. It is the pathway through which data flows from one device to another. See also bus speed, frontside bus. bus speed —...
  • Page 225 compatibility — The extent to which computers, programs, or devices can work together harmoniously, using the same commands, formats, or language as another. configuration — (1) The collection of components that make up a single computer system. (2) How parts of the system are set up (that is, configured).
  • Page 226 Glossary disable — To turn a computer option off. See also enable. disc — A round, flat piece of metal, designed to be read from and written to by optical (laser) technology, and used in the production of optical discs, such as CDs and DVDs. Compare disk. disk —...
  • Page 227 DVD — An individual digital versatile (or video) disc. See also DVD- ROM. DVD-ROM (digital versatile [or video] disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs. Compare CD-ROM.
  • Page 228 — The physical components of a computer system. Compare software. Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
  • Page 229 hot swapping — The ability to add or remove devices from a computer while the computer is running and have the operating system automatically recognize the change. icon — A small image displayed on the screen that represents a function, file, or program.
  • Page 230 — The main circuit board in the computer. It contains the processor, memory, and other primary components.
  • Page 231 non-interlaced — A method of refreshing a computer screen, in which each pixel of every line is refreshed as the electron beam scans across and down the screen. Compare interlaced. non-system disk — A disk for storing programs and data that cannot be used to start the computer.
  • Page 232 — Synonymous with reboot. To reset the computer by reloading the operating system without turning the computer off. See also boot. RJ-11 — A modular connector used on most U.S. telephone systems and direct-connect modems. The RJ-11 connector is a 6-wire connector.
  • Page 233 ROM (read-only memory) — Non-volatile memory that can be read but not written to. By non-volatile, we mean that information in ROM remains whether or not the computer is receiving power. This type of memory is used to store your computer’s BIOS, which is essential instructions the computer reads when you start it up.
  • Page 234 Glossary universal serial bus (USB) — A serial bus that supports a data transfer rate of up to 480 Mbps (480 million bits per second). USB can connect up to 127 peripheral devices through a single all-purpose USB port. USB allows hot swapping of peripherals. See also bus, hot swapping, serial.

  • Page 235: Index

    Index Numerics 101-key keyboard 79 AC adapter 48 AC power cable connectors 205 accessories carrying cases 75 memory 57 Add Printer Wizard 65 adding memory 57 adjusting recording quality 140 Alt keys 80 arm/wrist strain 43 assign keys Fn-esse 151 audio .wav files 139 audio features 138...
  • Page 236 179 devices keyboard 63 mouse 63 dial-up connection 133 Dial-Up Networking Wizard 133 disable/enable TOSHIBA Touch and Launch Disk Defragmenter 186 disk drive corrupted/damaged data files 187 missing files/trouble accessing a disk 186 running slow 186 diskette drive can not insert a diskette 187 can’t read a diskette 187...
  • Page 237 TV 69 display modes hot key 203 display output settings 71 display panel closing 74 display, external adjusting 72 disposal information 27 disposing of used batteries 123 DMA (Direct Memory Access) 177 double-click 55 drive problems 188 troubleshooting 180 DVD-ROM/multi-function drive can’t access disc 188 drive tray will not open 188 problems 188...
  • Page 238 Index Hibernation mode hot key 202 hot key display modes 203 Hibernation mode 202 keyboard 204 keyboard overlays 204 power usage mode 200 Stand By mode 201 volume mute 199 hot key power usage mode 118 hot key utility 157 hot keys 199 hot swapping 144 PC Cards 147...
  • Page 239 59 memory module inserting 60 removing 62 microphone 139 Microsoft Support Online Web site modem connecting to a telephone line 131 determining COM port 130 problem solving 193 resetting port to default settings upgrading 130 module Wi-Fi Mini PC 135...
  • Page 240 184 checking device properties 179 compact discs not running computer hangs when PC Card computer will not power up 172 contacting Toshiba 195 corrupted/damaged data files 187 Device Manager 178 disabling a device 179 disk drive is slow 186...
  • Page 241 55 security 154 selecting a place to work 39 setting up adding memory 57 computer 58 TOSHIBA Touch and Launch setting up a connection 133 setting up your computer 46 settings TOSHIBA Touch and Launch shutting down more quickly 101...
  • Page 242 Internet Web sites 197 Toshiba Accessories information 38 Toshiba Console 153 Toshiba Hardware Setup 158 Toshiba online resources 107 TOSHIBA Touch and Launch 166 disable/enable 169 Toshiba utilities 148 traveling tips 124 turning off the computer 73 turning on the power 53...

This manual is also suitable for:

A55-s106A55-s1063A55-s1064A55-s1065A55-s1066A55-s129 ... Show all

Table of Contents