Toshiba STRATA CIX-CTX-QRG-VB VERSION B1 Quick Reference Manual page 6

Hold
1. To place a call on Hold, press the
2. To return to the held call, press the held line's button.
If you do not return to the held call, it rings back to your phone.
If you are busy on another call, you hear two tone bursts. If the
held party hangs up, the call is released.
3. If you have additional lines at your station to hold, repeat Step
1 above.
! To place a call on Exclusive Hold
!
While on a call, press
pick up your call.)
! To place a call on Automatic Hold
!
While on a call, press another extension button to receive/
originate a new call. You can switch between calls without
having to press
Make sure this feature is programmed on your system; if not,
existing calls will drop.
! To place a call on Consultation Hold
If you have multiple extensions on your phone, you can hold a
different call on each extension.
!
Press
Call Forward - Any Calls (Internal & External)
There are two ways to perform each Call Forward:
! Enter the button sequence below
All Calls:
Busy:
No Answer: Press Ext. +
Timer (seconds, 2-digits) +
Busy No Answer:
No. + Timer
Cancel:
! ...or program a flexible button to perform the sequence
See "Flexible Buttons" for instructions.
6
Strata CIX/CTX DKT/IPT Telephone Quick Reference Guide 11/05
Hold
Cnf/Trn
.
Press Ext. + #6011
Press Ext. + #6021
Press Ext. + #6041
(seconds, 2-digits)
Press Ext. + #6051
Hold
Hold
twice. (No one can accidently
.
________ + Destination No.
or
________ + Dest. No.
or
#6031 ________
or
#
+ #
________
or
button.
+ Dest. No. +
________ + Dest.
or