Toshiba TLP780U Owner's Manual page 32

Projection on the screen (continued)
Remote control
INPUT ON/STANDBY
LASER
AUTO
KEYSTONE
SET
L-CLICK R-CLICK
VOLUME/ADJUST
MENU ENTER EXIT
PIP FREEZE
RESIZE
CALL MUTE
Control panel
(Main unit side)
ON / STANDBY
VOL / ADJ
6
6
Notes
• When changing the projecting angle, adjust the foot adjuster.
• When the screen image is distorted in keystone, press the KEYSTONE button to adjust the
distortion.
6
• Due to the lamp characteristic, flickers may occasionally occur in a picture. This is not
malfunction of the unit.
• The lamp may rarely burst with a big sound.
• The projector's liquid crystal panel is made using extremely advanced technology, but there
may be black spots (pixels that do not light) or bright spots (pixels that are constantly lit) on
the panel. Please note that these are not malfunctions.
• When trying to press the button whose operation is not available, the icon
• When supplying the signal not compatible to the projector, the icon
• When signals are not input from the input source, the icon
• The projector may stop operating if the surrounding temperature is too high or if the air filter
is clogged with dust.
Press VOL/ADJ (+/-) to adjust volume.
Press the (+) button to increase volume.
Press the (-) button to decrease volume.
35
62
32
CONTENTS
20
appears.
appears.
appears.