Cleaning And Care - AEG GourmetPRO Series Instruction Book

Getting started
7. Caution! Keep hands and utensils
GB
out of the blending jug while
blending. After processing heavy
loads, let the appliance rest for 5
minutes before next use.

Cleaning and care

1. Quick cleaning: Pour warm water
into the jug, add a few drops of de-
tergent. Mix water and detergent by
pressing the "Boost" button. Finally,
rinse the jug under running water.
Note: To avoid crazing of the jar,
always rinse the jar with clean water
directly after using in order to prevent
the plastic material being impacted
by acids or essential oils. Always rinse
the jar clean even before placing it
into the dishwashwer.
22
SB9300_Premium_Blender_AEG.indd 22
B
A
8. Boost Function: Press the "Boost"
button (A) and hold it down for
pulsing, when you need a short
burst of power.
Smoothie Function: Press the
"Smoothie" button once (B) to get
ice crushed and your smoothie
blended to the desired consist-
ency with the specific program.
The blender will stop automatically
when the program is ready.
2. Thorough cleaning of the motor
housing and interface: Turn the
blender off and unplug the power
cord. Wipe the motor housing with
a damp cloth.
Warning! Never immerse the
housing, plug, or cord in water or
any other fluid.
A B C
9. Ice Crush Function: Press the "Ice
Crush" button (A) to start the Ice
Crush program. (For best results,
work in small batches.)
Drink Function: Press the "Drink"
button (B) to mix a drink.
Soup Function: Press the "Soup"
button (C) to mix soup.
Caution! Never run the blender
empty. When processing hot liq-
uids, see step 4.
3. Thorough cleaning of the jug:
Note! The Blade assembly is not re-
movable.
Remove the lid and measuring cup.
Rinse the blade assembly in water and
detergent and place then lid, measur-
ing cup and jug into the dishwasher
for thorough cleaning.
Caution! Handle carefully, the
blades are very sharp!
2016-02-24 09:11:40