(4) When the Dower source is aDDlied.
the input signal end the outDut contacts are shown in Table 2.
Check this relationship during the test.
the rain circuit switch ON and Derforg the following checks:
I f t h e s e t start-up tiae d e l a y i s t o o s h o r t , t h e r e l a y say
be actuated.
adjusting knob accordingly.
has exDired. apply current above the set detection value
t o confirm t h a t t h e r e l a y f u n c t i o n s ( a f t e r t h e resoonse
d e l a y tile),
i n d i c a t i n g lamp l i g h t s a t t h e sale t i m e t h e r e l a y ODerates.
the relay is excited and the
Table 2
In such a case, reset the detection delay tiae
A f t e r t h e s t a r t - u p tiae d e l a y
In addition, check that the detection
between
turn