Toshiba 1000 Series Installation Instructions page 3

FOR AUTHORIZED SERVICE PERSONAL ONLY
TOSHIBA/HOUSTON INVERTER PLANT
DESIGN DATA
SUBJECT:
1000 Series UPS Options - Frequency Conversion
ii. If you installed the B mask type, it should be labeled "B Mask Flash" in the
title like the one shown below.
5. Click Load in the Menu bar to load the file (*.mot) that you want to reflash to the
CPU.
6. Click the ALL button in the Toolbar and it will display "Programming."
this period, both the LEDs labeled "Bypass_LED" and "On_LED" are turned on
for the tower UPS. For the Rackmount 1U, both the LEDs labeled "Inverter" and
"DC LOW" are lit.
NO. REVISION
D-UM0029 Page 3 of 4
DATE BY
1,2
During