Wireless Communication Switch (Wireless LAN/Bluetooth
model only)
1. To enable Wireless module, make sure the Wireless Communication
Switch is turned on. (The default setting is Power Off. Slide the switch
to the left to turn the power on.)
2. If this is your first time turning on the switch, the IP Address Page will
pop up for you to set the IP address, Subnet mask and Default
gateway.
Wireless LED Descriptions
LED indicates the different status:
Off
Orange
User's Manual
Wireless Communication Switch
Wireless Communication Switch is turned OFF
Wireless Communication Switch is turned ON
(On ←→ Off)
Basic Skills
2-5