Selecting Wep Security Mode - Toshiba WIRELESS LAN MODULE GN-1050 Operator's Manual

1.SETTING UP WIRELESS NETWORK

Selecting WEP security mode

The WEP is a data encryption method using the WEP key between the Access Point and other wireless devices.
Compared with WPA/WPA2 and WPAPSK/WPA2PSK, the WEP is less security. If the wireless network is configured in the
Infrastructure Mode and the Access Point supports WPA/WPA2 or WPAPSK/WPA2PSK, it is recommended to use WPA/
WPA2 or WPAPSK/WPA2PSK rather than WEP.
1
Press the [WEP] button and press the [NEXT].
The WIRELESS ENCRYPTION - WEP screen is displayed.
2
Enter the following items and press the [NEXT].
WEP ENCRYPTION
Select the bit length of the WEP key.
KEY ENTRY METHOD
Select the character code for the WEP key.
[WEP KEY]
Press this to enter the WEP key.
The maximum length of WEP key varies depending on the WEP Encryption and Key Entry Method.
HEX:
ASCII:
When pressing the [WEP], the letter entry screen is displayed. Enter the value using the keyboard and digital
keys, and press the [OK] to set the entry.
64 bit 128 bit 152 bit
10 26
5 13
1 SETTING UP WIRELESS NETWORK
32
16
Setting Up the Infrastructure Mode 33