Removal And Installation Of Aftercooler Assembly - Komatsu Galeo PC800-8 Shop Manual

50 Disassembly and assembly
Removal and installation of
aftercooler assembly
Removal
k
Lower the work equipment to the ground
and stop the engine.
1. Open radiator grille (1) and lift it off.
2. Remove 3 radiator upper covers (2).
3. Loosen clamps (3) of the rubber hose.
a Make a mark at the tube of each hose end
to indicate the connecting position. (See
the following figure.)
PC800, 850-8
4. Lift off frame (4).
1
5. Sling aftercooler assembly (5) temporarily.
6. Remove the mounting bolts. While disconnect-
ing aftercooler assembly (5) from the rubber
hose, lift it off.
4
Aftercooler assembly: 45 kg
[*1]
SEN01053-01
15