Advertisement
5 Installing E12
Reassembly Note: Hold the main board with your left hand on the plastic tip and re-insert it, making
sure that the board is properly aligned with the protruding noses of the rear chassis and the slit for the
internal module rack board and that the board is connected properly to the rack connector. The screws
must be reinserted in the order specified in the picture above. Note that the screws marked "1a" must
only be inserted first in non-battery versions of the monitor. In battery versions the battery board is
attached here with long screws. Screw number 3 is attached to a white spacer which is not shown in
this picture.
20
Plastic Tip
Slide under
protruding noses
Align with internal rack
Press firmly on rack connector
Installation Instructions
Hide quick links:
Advertisement
