LG S3 F Series Owner's Manual page 17

Reversing the door
It is possible to reverse the direction of the door
swing. This should be done by the installer at the
time of installation, if desired.
NOTE
• If the direction of the door swing needs to
be changed after installation, contact the LG
Customer Information Centre.
Using Anti-Slip Sheets
Anti-slip sheets prevent the appliance from
shaking or shifting when opening or closing the
door.
1
Clean the floor to attach the anti-slip sheets.
• Use a dry rag to remove and clean foreign
objects or moisture. If moisture remains, the
anti-slip sheets may slip.
2
Adjust the level after placing the appliance in
the installation area.
3
Place the adhesive side a of the anti-slip
sheets on the floor.
4
Put the appliance on the anti-slip sheets.
• Do not attach the adhesive a of anti-slip
sheets to the feet of the appliance.
5
Recheck the appliance's levelness.
• Push or rock the edges of the appliance
gently to make sure that the appliance does
not rock. If the appliance rocks, level the
appliance again.
NOTE
• The pads may leave a sticky residue when they
are removed. The residue can be removed with
alcohol.
Installing the anti-tip device
Install the anti-tip device packed with the appliance
to reduce the risk of tipping.
• Refer to the instructions provided with the anti-
tip kit for proper anti-tip device installation.
• Do not operate the appliance without the anti-
tip device in place and engaged.
• Check that the anti-tip device is properly
installed. With the appliance in its final location,
make sure that the slide adjuster on the cord is
adjusted until there is about 2.5 cm of slack in
the cord.
• If an anti-tip device is not properly installed,
the appliance could be unexpectedly tipped
by a child or adult standing, sitting, leaning, or
placing excessive weight on an open door or
the interior parts.
• The use of the anti-tip device does not preclude
tipping of the appliance when it is not properly
installed.
EN
17