Program Radio Stations Manually; Select A Preset Radio Station; Play Tape Recorder; Play Tapes - Philips FWD14/98 User Manual

Program radio stations
manually
You can program a maximum of 20 preset FM
radio stations.
1
Tune to a radio station.
2
Press PROG to activate program mode.
»
[PROG] (program) blinks on the
display.
3
Press ALBUM/PRESET -/+ to allocate a
number (1 to 20) to this radio station,
then press PROG
»
The preset number and the frequency
of the preset station are displayed.
4
Repeat the above steps to program other
stations.
Tip
To overwrite a programmed station, store
another station in its place.

Select a preset radio station

1
In tuner mode, press ALBUM/PRESET
-/+ to select a preset number.
9 Play tape
recorder
Note
When you play or record a tape, the sound
source cannot be changed.

Play tapes

You can also listen to tapes with this product.
1
Press SOURCE on the main unit to
select the tape source.
2
Press to open the tape door.
3
Load the tape with the open side
downward and the full spool to the left.
4
Press to start play.
To pause/resume play, press
To fast rewind/forward the tape,
press / .
To stop play, press

Record form different sources

You can record from different sources.
Record from disc
1
Press DISC to select the disc source.
2
Place a disc on the tray with the printed
side facing up.
3
Press to open the tape compartment.
4
Insert a blank tape and close the tape
compartment.
5
Select the desired track(s).
to select the track.
To start recording from a point
within a track, press
sequence, program the tracks (see
"Play options">"Program").
.
.
/
at the point.
EN 25