Philips DV910VHS98 Owner's Manual page 10

DV910(H9100).QX33 01.8.9 10:26 AM
10 Hookups (cont'd)
This connection will let you use the features of both the VCR and the DVD Player.
1
Cable Box/DBS
IN
OUT
Cable
Signal
RF coaxial cable
Connections
1
Connect a Cable signal to the IN Jack on the Cable
Box/DBS.
2
Use an RF coaxial cable (supplied) to connect the OUT Jack
on the Cable Box/DBS to the ANT -IN (Antenna In) Jack on
the DVD/VCR.
3
Use a second RF coaxial cable to connect the ANT -OUT
(Antenna Out) Jack on the DVD/VCR to the TV's Antenna In
jack.
Remember...
There are two ways to connect your Cable Box/DBS to the DVD/VCR.With the connection on this page:
You may view any channel. Select channels at the Cable Box/DBS, not the DVD/VCR.To record or view any
TV channel, follow these steps. 1) Press the OUTPUT SELECT button to put the DVD/VCR in VCR mode.
2) Press the VCR/TV button to choose VCR position. 3) Press the CHANNEL
DVD/VCR to the Cable Box/DBS output channel (03 or 04). Set the DVD/VCR's CH3/CH4 switch to the
same channel. 4) Set the TV to the same channel to which you set the DVD/VCR.
5) Select the channel you want to view/record at the Cable Box/DBS.
You may not view a channel other than the one you are recording.
You can only program a timer recording for one channel at a time. Set the TV and the DVD/VCR to the
Cable Box/DBS output channel (channel 03 or 04); set the DVD/VCR's CH3/CH4 switch to the same chan-
nel. Set your Cable Box/DBS to the channel you want to record.When you enter the channel you want to
record in a timer recording, select channel 03 or 04 (the Cable Box/DBS output channel). (This is step 5 on
page 37.) Leave the Cable Box/DBS on for a timer recording.
Page 10
DVD/VCR to Cable Box/DBS and TV
Using only basic RF coaxial cables
2
DVD/VCR
DVD/VCR
OUT
IN
ANT-IN
L
AUDIO
R
ANT-OUT
VIDEO
CH3 CH4
DVD/VCR
AUDIO OUT
L
RF coaxial cable
R
o/p buttons to set the
7 5
A N T
/
C A B
L E
3
TV's ANTENNA
IN Jack