Page 1
Form No. 3413-793 Rev B Stump Grinder Fit-Up Kit TX 1000 Compact Tool Carrier Model No. 23172 Installation Instructions WARNING CALIFORNIA Proposition 65 Warning This product contains a chemical or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.
Page 2
Preparing the Machine No Parts Required Procedure 1. Park the machine on a level surface. 2. Engage the parking brake. 3. Lower the loader arms. 4. Shut off the engine and remove the key. g036689 Figure 1 Installing the Shield Brackets Parts needed for this procedure: Right shield bracket...
Page 3
2. Drill a hole (9/32 inch) through the frame at each marked location. 3. Install the left shield bracket on the left frame using 2 bolts (1/4 x 3/4 inch) and 2 locknuts (1/4 Assembling the Operator inch) as shown in Figure Shield Parts needed for this procedure:...
Page 4
5. Torque the large bolt (1 x 2-1/4 inch) to 406 N∙m (300 ft-lb), and torque the small bolts (1/2 x 1-1/2 inches) to 101 N∙m (75 ft-lb). 6. Route the hoses through the hose loop (Figure Replacing the Quick-Attach Assembly Parts needed for this procedure: Quick-attach assembly...