Lenovo ThinkSystem SR650 Series Setup Manual page 197

To install a hot-swap drive, complete the following steps:
Watch the procedure. A video of the installation process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-A25P7vBoGa_wn7D7XTgDS_
• Youku:
http://list.youku.com/albumlist/show/id_50483444
Figure 117. 2.5-inch hot-swap drive installation
Figure 118. 3.5-inch hot-swap drive installation
Step 1. Ensure that the drive tray handle is in the open position. Slide the drive into the drive bay until it
snaps into position.
Step 2. Close the drive tray handle to lock the drive in place.
Step 3. Continue to install additional hot-swap drives if necessary.
.
Chapter 3 Server hardware setup
193