Table of Contents
Advertisement
Configuration Options (Cont.)
(Continued from previous page)
System Information
---------------------------
Hardware ID:
OS version:
Application version: 2.5
Encoder version:
MAC address:
S/N:
It is recommended that you record this information for future reference. If you find it necessary
to call customer service or engineering support, please have this information available.
Reset the HCS7720
Use the following procedure to reset the HCS7720.
1. Connect a PC to the HCS7720 Service Port, and access the Main Menu as described on
page 15.
2. At the Main Menu Command > prompt, type the menu command that corresponds to the
Reset Transcoder option and press Enter.
The system resets the HCS7720. During the reset process, several pages of status and
diagnostic messages may be displayed. After reset, the system displays the System
Information banner and Main Menu prompt, and the HCS7720 resumes normal operation.
Update HCS7720 Firmware
If you are not sure of the current firmware version, view and record the System Information for
the transcoder before you initiate the firmware update. See "View System Information" above.
1. Confirm the directory location of the required firmware update configuration (.cfg) and
package (.pkg) files. Note: For a TFTP file transfer, the firmware update files must be
available on the same machine as the TFTP server.
2. Connect a PC to the HCS7720 Service Port, and access the Main Menu as described on
page 15.
3. At the Main Menu Command > prompt, type the menu command that corresponds to the
Update Firmware option and press Enter.
The Firmware Update Menu is displayed:
Firmware Update Menu
--------------------
1. Update Using Serial Xmodem File Transfer
2. Update Using TFTP Transfer
r. Return to Main Menu
>
18
7720-v1.1-2011-1026
HCS7720-943-2011-1025
1.2
00:0C:63:00:1D:87
001-12420016
(Continued on next page)
206-4180
Advertisement
Table of Contents
