BT-2200
Included Items
Headset
Attach to the helmet to view images.
➡ "4. Wearing the headset" p. 14
Controller (with controller hold-
er)
Operates the product.
➡ "Wearing the Controller" p. 9
Armband
Allows you to wear the controller on
your arm.
Reel clip
Use this to secure the cable.
Battery packs (x2)
Powers the product.
➡ "Charging the Battery" p. 6
AC adapter/AC cable
Charges the product.
➡ "Charging the Battery" p. 6
Supported Helmet Sizes
External Dimensions
Width 260 mm, depth less than 300 mm
Brim length
Less than 45 mm
Perimeter
Less than 800 mm
Brim width
Less than 180 mm
* This cannot be used for headsets with a protective mask at the front or when a shield is attached to the helmet.
* This cannot be used with a helmet which has a brim all around the helmet.
* This cannot be used with bike helmets, motor bike helmets, or disaster prevention helmets.
Shade
Shades the product from too much
exterior light.
➡ "Installing the Shade/Protective
Shield/Lens Holder" p. 7
Protective shield
Protects the product's lens from foreign
objects and air-borne objects.
➡ "Installing the Shade/Protective
Shield/Lens Holder" p. 7
Lens holder
Install lenses to the holder and attach
it to the headset. This allows users who
wear glasses to remove their glasses
before wearing the headset.
➡ "Installing the Shade/Protective
Shield/Lens Holder" p. 7
Mono earphones with mic
Outputs audio from the product, and
inputs audio to the product.
Hexagon wrench and screws (x2)
Use these to attach the lens holder,
shade, and protective shield.
Helmet holders (x4)
Use these to secure the helmet to the
headset.
User's Guide
11