Push To Talk - Yamaha Revolabs Executive Elite 01-ELITEEXEC8 Room Control Api Manual

Property/Action Command Format
pushtotalk get pushtotalk <group name>
pushtotalk set pushtotalk <group name>
<0/1/2>
pushtotalkmic get pushtotalkmic ch
<channel number>
regnotify regnotify
removemicfromgroup removemicfromgroup ch
<channel number> <group
name>
restart set restart ch <channel
number>
restart set restart <component>
rfautoscaling get rfautoscaling
rfautoscaling set rfautoscaling <0/1>
rfpowerlevel get rfpowerlevel
rfpowerlevel set rfpowerlevel <2/3/.../6>
serialnumber get serialnumber
<base/antenna>
shutdownmic shutdownmic ch <channel
number>
startupunmutegroup get startupunmutegroup
<group name>
startupunmutegroup set startupunmutegroup
<group name> <0/1>
systemclockmode get systemclockmode
systemclockmode set systemclockmode
<0/1/2>
systemclocksource get systemclocksource
systemclocksource set systemclocksource
<0/1/2>
systemclockstatus get systemclockstatus
systemname get systemname
tabletopmutegroup get tabletopmutegroup
<group name>
tabletopmutegroup set tabletopmutegroup
<group name> <0/1>
usbipaddr get usbipaddr
version get version
Description
Retrieve group push to talk setting value,
1 - push to talk set, 0 - not set.
Configure group push to talk setting,
1 - push to talk set, 0 - not set, 2 - toggle.
Retrieve microphone's push to talk state.
1 - push to talk set, 0 - not set.
Enables system notification
Remove the given mic from the designated
group.
Restart the given channel, if channel A is
specified, restart all mics.
Restart the specified component,
all - all devices, AR - antenna receiver,
base - base receiver.
Retrieve the RF auto scaling setting value,
0 - off, 1 - on.
Configure the RF auto scaling setting,
0 - off, 1 - on.
Retrieve RF power level.
2 = (0 - 20 ft), 3 = (10 - 40 ft), 4 = (30 - 75 ft),
5 = (50 -150 ft), 6 = (100 - 300 ft)
Configure RF power level.
2 = (0 - 20 ft), 3 = (10 - 40 ft), 4 = (30 - 75 ft),
5 = (50 -150 ft), 6 = (100 - 300 ft)
Retrieve component serial number.
Power the microphone off.
Retrieve given group's unmute at startup state,
0 - mute at startup, 1 - unmute at startup.
Configure given group's unmute at startup state,
0 - mute at startup, 1 - unmute at startup.
Retrieve system clock mode,
0 - Internal, 1 - External, 2 - Auto.
Configure system clock mode,
0 - Internal, 1 - External, 2 - Auto.
Retrive system clock source,
0 - local, 1 - Sync bus, 2 - Avb.
Configure system clock source,
0 - local, 1 - Sync bus, 2 - Avb.
Retrieve system clock status.
0 - no system clock, 1- system clock
Retrieve system name.
Retrieve the given group's tabletop mute state,
0 - not tabletop mute, 1 - tabletop mute.
Configure the given group's tabletop mute state,
0 - not tabletop mute, 1 - tabletop mute.
Retrieve the USB ethernet interface IP address.
Retrieve the system bundle version.
Response
val pushtotalk <group name>
<0/1>
val pushtotalk <group name>
<0/1/2>
val pushtotalkmic ch
<channel> <0/1>
removemicfromgroup ch
<channel number> <group
name>
val restart ch <channel
number>
val restart <component>
val rfautoscaling <0/1>
val rfautoscaling <0/1>
val rfpowerlevel <2/3/.../6>
val rfpowerlevel <2/3/.../6>
val serialnumber base <serial
number>
shutdownmic ch <channel
number>
val startupunmutegroup
<group name> <0/1>
val startupunmutegroup
<group name> <0/1>
val systemclockmode
<0/1/2>
val systemclockmode
<0/1/2>
val systemclocksource
<0/1/2>
val systemclocksource
<0/1/2>
val systemclockstatus <0/1>
val systemname <name>
val tabletopmutegroup
<group name> <0/1>
val tabletopmutegroup
<group name> <0/1>
val usbipaddr <ip address>
get version <version>
10