English 18 V DIE GRINDER DCG426 Congratulations! EC-Declaration of Conformity You have chosen a D WALT tool. Years of experience, thorough Machinery Directive product development and innovation make D WALT one of the most reliable partners for professional power tool users.
Weight English Batteries Chargers/Charge Times (Minutes) Weight DCB107 DCB113 DCB115 DCB118 DCB132 DCB119 DCG426 DCB546 18/54 6.0/2.0 1.05 DCB547 18/54 9.0/3.0 1.25 DCB181 0.35 DCB182 0.61 DCB183/B 0.40 DCB184/B 0.62 DCB185 0.35 DCB187 0.48 General Power Tool Safety Warnings e ) When operating a power tool outdoors, use an extension cord suitable for outdoor use.
English ADDITIONAL SPECIFIC SAFETY RULES 4) Power tool use and care a ) Do not force the power tool. Use the correct power Safety Warnings Common for Grinding tool for your application. The correct power tool will do the job better and safer at the rate for which it a ) This power tool is intended to function as a grinder.
English by your operation. Prolonged exposure to high intensity in turn causes the uncontrolled power tool to be forced in the noise may cause hearing loss. direction opposite of the accessory’s rotation at the point of the binding. j ) Keep bystanders a safe distance away from work area.
English of cut. Overstressing the wheel increases the loading and • Safely dispose of the old plug. susceptibility to twisting or snapping of the wheel in the • Connect the brown lead to the live terminal in the plug. cut and the possibility of kickback ort wheel breakage. •...
English Pull by plug rather than cord when disconnecting • Charge Indicators charger. This will reduce risk of damage to electric plug Charging and cord. • Make sure that cord is located so that it will not be Fully Charged stepped on, tripped over, or otherwise subjected to damage or stress.
Page 11
English Charger Cleaning Instructions WARNING: Fire hazard. Do not store or carry the battery pack so that metal objects can contact WARNING: Shock hazard. Disconnect the charger exposed battery terminals. For example, do not place from the AC outlet before cleaning. Dirt and grease the battery pack in aprons, pockets, tool boxes, product kit may be removed from the exterior of the charger using a boxes, drawers, etc., with loose nails, screws, keys, etc.
108 Wh (1 battery implied). Battery Type Storage Recommendations The DCG426 operates on an 18 volt battery pack. 1. The best storage place is one that is cool and dry away These battery packs may be used: DCB181, DCB182, DCB183, from direct sunlight and excess heat or cold. For optimum...
English Description (Fig. A) 2. Slide it into the handle until the battery pack is firmly seated in the tool and ensure that you hear the lock snap into place. WARNING: Never modify the power tool or any part of it. To Remove the Battery Pack from the Tool Damage or personal injury could result.
English The three-speed feature of your tool allows you to select line of cut and near the edge of the workpiece on both speed ranges based on the application and accessory used. sides of the wheel. To select lowest speed setting, turn the tool off and permit it •...
English Rechargeable Battery Pack insulation in the machine becoming degraded with a potential risk of an electrical shock. This long life battery pack must be recharged when it fails To avoid build-up of metal swarf inside the machine, we to produce sufficient power on jobs which were easily done recommend to clear the ventilation slots on a daily basis.
Page 16
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België en Luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)