Table of Contents
Advertisement
4. VLT Camera Control Setup.
4.1. Adjusting the IP address of the ERI.
NOTE: The ERI IP address is the IP address assigned to the ERI.
A. Power on system and wait for ERI to boot. On the Base station main status screen, next to the ERI entry a
coloured indicator will be present when the ERI has booted.
B. Press the up or DOWN navigation keys to access the ERI main menu.
C. Press the RIGHT navigation key to access the ERI adjustment menu.
D. IP Adjust: > will be highlighted, press the RIGHT navigation key to access the IP Adjust Menu.
E. ERI Adjust: > will be highlighted, press the RIGHT navigation key to access the ERI IP Adjust screen.
Address: will be highlighted, press the RIGHT navigation key, the first value of the ERI IP address will be
highlighted in red.
F. Using the UP or DOWN navigation keys set the value required. Press the RIGHT navigation key to select
the next value and adjust as before. Repeat until all four values are as required. The default setting is
192.168.001.001. Press the RIGHT navigation key so that only Address: is highlighted.
G. Press the DOWN navigation key to highlight Submask: Press the RIGHT navigation key, the first value of
the Submask will be highlighted in red.
H. Using the UP or DOWN navigation keys set the value required. Press the RIGHT navigation key to select
the next value and adjust as before. Repeat until all four values are as required. The default setting is
255.255.255.000. Press the RIGHT navigation key so that only Submask: is highlighted.
I. Press the DOWN navigation key to highlight Gateway: Press the RIGHT navigation key, the first value of
the Gateway address will be highlighted in red.
J. Using the UP or DOWN navigation keys set the value required. Press the RIGHT navigation key to select
the next value and adjust as before. Repeat until all four values are as required. The default setting is
192.168.001.001. Press the LEFT or RIGHT navigation keys so that only Submask: is highlighted.
K. Press the LEFT navigation key. Reboot: No will be displayed. Press the RIGHT navigation key to highlight it
in red. Press the UP navigation key to select Reboot: Yes. Press the LEFT navigation key to reboot the ERI.
L. The screen will display REBOOTING. When rebooting has finished the unit will return to the Basestation
main status screen.
4.2. Adjusting the Camera IP address setting in the ERI.
NOTE: This setting is to allow the ERI to know the IP address assigned to the VLT.
A. With the system powered on and the ERI booted as above.
B. Press the up or DOWN navigation keys to access the ERI main menu.
C. Press the RIGHT navigation key to access the ERI adjustment menu.
Advertisement
Table of Contents
