Static Ip Address; Clone Mac Address; Dns; Lan - Philips CAW7740N/05 User Manual

Philips wireless router caw7740n

Hide thumbs Also See for CAW7740N/05:

Table of Contents

Enlarged version

4.4.3 Static IP Address

Your ISP provides a static IP address to access Internet services.

Some ISP's require you to register your MAC address with them. If you

have done this, the MAC address of the router must be changed to the

MAC address that you supplied to your ISP.

Domain Name Servers (DNS) are used to map a domain name (e.g.,

www.philips.com) with the IP address (e.g., 64.147.25.20). The DNS

address is usually configured automatically. If this is not the case, one or

more DNS address will be provided to you by your ISP.

However, if there is a DNS server that you would rather use, you need

to specify the IP address here.

You can enable DHCP to dynamically allocate IP addresses to your

client PCs, or configure filtering functions based on specific clients or

protocols. The router must have an IP address for the local network.

The router can be quickly configured as a wireless access point for

roaming clients by setting the service set identifier (SSID) and channel

number. It also supports data encryption and client filtering. Check the

box to enable the wireless module function.

You must specify a common radio channel and SSID (Service Set ID) to

be used by the Wireless Router and all of its wireless clients. Make sure

you configure all of its clients to the same values.

Configuring the Wireless Router

Table of Contents

Caw7740n