Table of Contents
Advertisement
Followed by the same method set up other network parameters: Gateway, Netmask, DNS, note that if you
want on the Internet, be sure to set up DNS.
After setting, press K1 key development board (Back) to return on an interface, it will automatically
reconnect to the network.
2. Automatically set the IP address using DHCP
Parameter settings in the network interface, if the "Use static IP" option is checked, then click on it a bit, it
will cancel the check, while the following prompt text will become "Using DHCP", as shown:
Development board by key K1 (Back) to return to the previous interface, automatically reconnect to the
network using DHCP.
Advertisement
Table of Contents
