2 Press Next. The Set PV screen appears. This sets the type of measurement that you want to make.
a Press Edit. The list of available measurements appears (default value: Level).
b Scroll up or down the list and highlight the required measurement.
c Press OK. The measurement is selected.
For more information, see "Setting variables" on page 45.
3 Press Next. The PV Unit screen appears. This sets the measurement unit for the measurement type
that you just previously selected.
a Press Edit. The list of available measurement units appears.
b Scroll up or down the list and highlight the required measurement unit.
c Press OK. The measurement unit is selected.
For more information, see "Setting variable units" on page 45).
4 Press Next. The ↓ Empty/Zero screen appears. This sets the lowest level that you expect to measure
in the vessel.
a Press Edit.
b Set the required value (see "Setting a value" on page 35).
c Press OK. The value is set.
For more information, see "Changing the empty/zero value" on page 64.
5 Press Next. The ↑ Full/Span screen appears. This sets the highest level that you expect to measure in
the vessel.
a Press Edit.
b Set the required value (see "Setting a value" on page 35).
c Press OK. The value is set.
For more information, see "Changing the full/span value" on page 65.
6 Press Next. The Max Level Rate screen appears. This sets the expected rate at which the vessel fills
up or is drained.
a Press Edit. The list of available values appears.
b Scroll up or down the list and highlight the required value.
c Press OK. The value is applied.
For more information, see "Selecting maximum level rate" on page 51.
7 Press Next. The Display Line1 View1 screen appears (this sets the measurement displayed on the
first line of text, as illustrated in Figure 30 on page 40).
a Press Edit. The list of available values appears (default value: Level)
b Scroll up or down the list and highlight the required value.
c Press Next. The value is applied and you return to the beginning of the Easy Setup menu.
For more information, see "Configuring the display" on page 39.
38
User Guide