Motorola Cleartone CM5000 User Manual page 63

Scan Lists
1. From the main menu, select More > Group Setup > Scan
> Scan Lists
2. Scroll to the required scan list. Press View to see the
groups used in the scan list. Press Back to return to the
previous display.
3. To edit/view the contents of a scan list, press the Menu
.
button
4. In the List Optns sub-menu, scroll to the required option
and press Select.
• Rename the active scan list. Enter a new name (alias)
and press Ok. The display shows the new setting.
• Check the capacity of the active scan list (number of
groups stored in the list).
• To Clear all groups from the selected scan list, press
Yes. You will be prompted to remove all groups from
the selected scan list.
• Add a group to the selected scan list. Every added
group (including a favourite group) comes with its folder,
its name or number, and its priority (if pre-programmed).
> To select a folder, scroll through the folder list. The
list does not show folders whose groups are fully
used in the selected scan list. Press Ok to select a
folder.
> To select a group, scroll through the group list within
the selected folder. The list shows groups that are not
in the selected scan list. Press Ok
> To set a priority to a group, scroll through the priority
list: high, medium, or low.
A call from a high priority group will interrupt an on-
going call with a medium and low priority.
A call from a medium priority group will interrupt an
on-going call with a low priority.
A call from a low priority group will not interrupt any
on-going call.
.
.
55