Installing The Riser; Installation Instructions - GE RISER KIT Installation Instructions Manual

INSTALLING THE RISER

KIT CONTAINS:
1 Riser Body
18 Short Mounting
Screws
6 Long Mounting Screws
4 Bolts
4 Leveling Legs
WASHER/DRYER INSTALLATION PREPARATION
IMPORTANT: Do not lay the washer or dryer on its
back! Do not remove the shipping bolts on the back
side of the washer. The bolts must remain in place until
the washer is returned to an upright position.
2

Installation Instructions

2 Leveling
Leg Brackets
4 Plastic Spacer (A)
4 Metal Brackets
- For Condenser Dryer (B & C)
- For Vented Dryer (D & E)
To prevent damage, flatten the product carton to use
as a pad. Then carefully lay the left or right side of the
washer or dryer on top of the flattened product carton.
31-3000212 Rev. 0