Toshiba Hi-Speed Port Replicator III User Manual page 18

To disconnect a computer from the port replicator, first save
all of your work and then follow the steps below:
1 Make sure the Port Replicator lock switch on the port
replicator is set to the unlocked position.
Port Replicator lock switch
(Sample Illustration) Port Replicator lock switch on the port
replicator in the unlocked position
Eject
2 Press the
Docked light will turn off.
3 After the Docked light on the port replicator turns off,
pull the Eject lever towards you to release the computer
from the port replicator.
Docked light (Green)
Eject button
(Sample Illustration) Eject button on the port replicator
(Sample Illustration) Disconnecting a computer from the port
replicator
4 Lift the computer off of the port replicator.
Undocking your computer
button on the port replicator. The
Eject lever
18